Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Mounting the Phone on the Wall
1.Choose a desired wall location for the phone.
Wall mount hanger
2.Align nails or picture hooks with the wall- mount hanger located on the bottom surface of the base.
3.Hammer nails or hangers into the wall so the phone can hang flush with the wall.
4.Set the removable receiver tab with lip toward the top of the base.
5.Hang phone on nails or picture hangers making certain that the phone is flush with the wall.
Connecting the Stand for Flat Surfaces
When using the
1.Remove the stand from the plastic wrapper.
2.Turn the phone upside down with the battery compartment closest to you.
3.The stand attaches above where the battery compartment is located.
4.There are four (4) slots. The top slot is large and located in the center of the bottom surface of the unit. The bottom three (3) slots are situated closer together and are located near the battery compartment.
- 7 - | www.jWIN.com |