Lucent Technologies 6402D manual Line and Feature Button Lights, Light Meaning

230738i3.book Page 20 Thursday, July 8, 1999 3:40 PM

Feedback Tones (continued)

Tones

Meaning

coverage	One short burst of tone; indicates your call
	will be sent to another extension to be
	answered by a covering user.
dial	A continuous tone; indicates dialing can
	begin.
intercept/	An alternating high and low tone; indicates
time-out	a dialing error, a denial of the service
	requested, or a failure to dial within a
	preset interval (usually 10 seconds) after
	lifting the handset or dialing the previous
	digit.
recall dial	Three short bursts of tone followed by a
	steady dial tone; indicates the feature
	request has been accepted and dialing
	can begin.
reorder	A fast busy tone repeated 120 times a
	minute; indicates all trunks are busy.
ringback	A low-pitched tone repeated 15 times a
	minute; indicates the number dialed is
	being called.

Line and Feature Button Lights

Line and Feature Button Lights

Light

Meaning

Steady red light next to	The red light next to Feature lets you
Feature and next to	know that the dial pad is now in
Spkr	Feature selection mode. The red light
	next to Spkr means that the
	one-way speaker is on.
Blinking red light next to	You have put a call on hold. In order to
Hold	return to the call, press and then
	release the switchhook.

20