Lucent Technologies 6402D Redial, Speaker Listen-Only, To redial the last number that you dialed

Page 8

230738i3.book Page 4 Thursday, July 8, 1999 3:40 PM

Redial

The Redial (or Last Number Dialed) feature automatically redials the last extension or outside number you dialed.

To redial the last number that you dialed

1. Press Redial .

The redialed number can be an outside number (up to 24 digits), an extension, or a trunk or feature access code.

Speaker (Listen-Only)

Note: The Speaker feature allows you to place calls or access other features without lifting the handset. However, in order to speak to the other party, you must use the handset.

To place a call without lifting the handset or for any listening-only feature (such as monitoring a call on which you have been put on hold)

1.Press Spkr .

2.Place a call or access the selected feature.

3.Adjust the speaker volume if necessary:

To raise the volume, press the right half of the Volume control button

labeled ; to lower the volume, press the left half of the Volume

control button labeled . If you have a display, it shows the volume level:

->>>>>> +

To change from the speaker to the handset

1. Lift the handset and talk.

To change from the handset to the speaker

1. While the handset is off-hook, press Spkr .

You can now hang up the handset (within 10 seconds) and the call will remain active on the speaker. However, in order to talk to the other party, you must use the handset.

To end a call (while the handset is on-hook and only the speaker is active)

1. With the handset on-hook, press Spkr .

4

Image 8
Contents N t e n t s Hearing AID Compatibility Important User Safety Instructions Service 6402 and 6402D Telephones 6402D TelephoneHeadsets HeadpiecesHold Call-Handling FeaturesConference Redial Speaker Listen-OnlyTo redial the last number that you dialed To change from the speaker to the handsetGetting Messages TestTransfer MessageSelected Voice Features How to Access a Voice Feature on the 6402 and 6402DSelecting a Personalized Ring Select RingAbbreviated Dialing AD Dial Pad Feature Administered Key On that KeyTo program/reprogram an AD entry on your Feature Directory To program or reprogram a Personal List item To place an AD call from your Feature DirectoryTo place a call using an AD list button or code To cancel Call Forwarding Call Forwarding All CallsCall Park To return to a call parked at your extensionCall Pickup Leave Word CallingTo cancel a Leave Word Calling message To cancel Send All CallsSend All Calls WhisperUsing the Display on the 6402D Date, Time, and Timer on the 6402D DisplayInstallation Desktop InstallationWall Installation Removing, Rotating, and Replacing the Handset RetainerRemoving the Desktop Stand Placing the Telephone on the Wall Jack Mounting Studs Removing the Telephone Tray Removing the Tray from the Base of the TelephoneInstalling the Telephone Number Card Removing and Reinstalling the Telephone Number Card CoverTones and Their Meaning Ringing TonesFeedback Tones Rings MeaningLight Meaning Line and Feature Button LightsLine and Feature Button Lights