‘ez Phone’ | Issue 1.0A |
3.5Lock Key Missing Message Box
1.If there is no lock key for ‘‘ez Phone’’, you will meet the below message box.
2.If you meet this message box, please contact the local dealer for ‘ez Phone’ lock key
3.6SLT and DECT.
zThere is “MON” button for SLT and DECT.
zACNR is not valid for SLT and DECT
zIf you want to make call with SLT, you should lift its receiver.
zIf you want to answer an incoming call with SLT, you should lift its receiver.
zDECT has “TALK” button instead of “MON” button. Both are very similar. But if you want to hang up a call with DECT, you should press “TALK” button on your dect terminal.
zFlex button assignment is not valid for SLT and DECT
zACNR is not valid for SLT and DECT.
zDECT ez Phone send some messages to DECT terminal. And DECT terminal will be given the message and do operation correctly what ez Phone sent. But DECT terminal could not display correct state automatically. So if you want to see correct state( like DND, FWD and so on), you need to refresh DECT terminal by your hand. But ez Phone state is always correct. After making call and answering call, the DECT terminal shows you correct state automatically.
zIf system does not give some feature for SLT and DECT, ez Phone does same for them.
67