Konftel 300W During a call, Switching lines during calls, Connecting a new line during a call

Page 19

During a call

Switching lines during calls

Connecting a new line during a call

You can add another line or switch between connected lines during a call.

Press the LINE MODE button during the call.

An indicator appears on the display screen in front of the selected line(s).

Use the arrow buttons to mark the line you want to connect and confirm your choice by pressing OK.

If you selected USB or MOBILE, this line will open. You then connect the call via the computer or mobile phone.

If you selected DECT, you will hear a dialling tone. You then dial the number on the Konftel 300W or use the Phonebook.

Press the LINE MODE key again to close the line mode.

Putting a line on hold during a call

Press the LINE MODE button during the call.

Use the arrow buttons to mark the line you want to put on hold and press the HOLD button.

The indicator in front of the selected line starts to flash.

Repeat the above to reconnect the line.

Press the LINE MODE key again to close the line mode.

Disconnecting a line during a call

Press the LINE MODE button during the call.

Use the arrow buttons to mark the line you want to disconnect and confirm your choice by pressing .

The indicator in front of the selected line goes out and the line is disconnected. The other calls can continue.

Press the LINE MODE key again to close the line mode.

17

Image 19

Contents Konftel 300W User Guide Dect conforms to the GAP standard Table of contents Description MaintenanceGeneral Description Writing text KeypadLine menu Display screenOn Hook Off HookWriting style in instructions Navigation and selection in menusMenu tree Unpacking GeneralGeneral Connecting and installing the unitUsing a computer Select connectivity option with the line modeRecharging batteries Battery charger optionalBatteries Connect to a Dect system Put the Konftel Dect base station in registration modeRegistration If registration was not successful Please see page 27 for other menu options and settingsConnect to a Dect system Registering the Konftel 300W with a Dect base stationRedialling Answering and making callsAnswering calls Making callsMaking three-way calls Dect Answering and making callsVoIP calls via a computer Calls via mobile phones Ending calls Adjusting the speaker volumeDuring a call Placing calls on temporary holdDuring a call Switching lines during callsConnecting a new line during a call Disconnecting a line during a callEntering text with the keypad Conference guideCreating conference groups Making conference group calls Press OK to continue and C to end the guide Conference guideIf you don’t get an answer  Either press OK or CDeleting conference groups Editing conference groupsDelete all conference groups  Select Menu Conf Guide Status 3,7 Conference guide settingsIf you experience problems making multi-party calls Displaying conference guide statusEditing contacts PhonebookSearching for contacts Adding contactsDisplaying phonebook status PhonebookDeleting contacts Deleting all conference groupsHold RecordingStarting a recording Mute functionListening to a recording RecordingDisplaying recording feature status Adjusting the recording indicatorManaging recordings Selecting languages SettingsDeactivating keypad tones Adjusting ring level volume Adjusting date and timeAdjusting Flash/R-pulse duration Settings Checking status Upgrading from a PC Installing Konftel PC SuiteRestart the Konftel 300W in upgrade mode Upgrading softwareOptional accessories Troubleshooting Audio Technical specificationsConnectivity Konftel charging stationEnvironment Technical specificationsApprovals EN55022, EN55024, EN61000-3-2, EN61000-3-3 Konftel Dect base station accessoriesElectrical safety EN609502001 EN301489-01/062008We give a two-year guarantee on our conference telephones Service and guaranteeGuarantee ServicePage

Related manuals

Manual 37 pages 8.87 Kb