MEMORY DIALING
You can quickly dial the numbers you stored into the 3
Storing Phone Number into Memory
1.Press the STORE button, “ 
” (short for programming) appears in the display.
2.Dial the phone number you want to store. You can store up to
22 digits, including a TONE ( 
) and a PAUSE (REDIAL/ PAUSE), each of which is counted as one digit.
3.For
For
Press the AUTO button, and then press one of the dialing keys (0 to 9) to store a phone number in.
4.The stored number and the location will show in the display.
5.Press the STORE button, and wait about 3 seconds to resume normal display.
6.Repeat steps
NOTE: When the batteries are dead or removed for more than 5 minutes, the stored numbers may be erased.
NOTE: If you want to store a calling card number into one of your memories, you may do this the same way you program a phone number into memory. If you need a pause in a number, simply press the REDIAL/PAUSE button on your phone.
NOTE: If you entered a wrong number, you may press the STORE button or HOOK switch, then start from the beginning.
TO STORE A NUMBER TO BE DIALED VIA PRIVATE BRANCH EXCHANGE (PABX)
Before entering a phone number in Step 2 in Storing phone number into memory, do as follows:
1.Enter the outside line access digit (e.g., 9).
2.Press the REDIAL/PAUSE button (for a pause).
TO CHANGE A STORED NUMBER
Just store a new number, as described above, the old one will be erased automatically.
Making Calls with One-Touch Speed Dial Buttons
1.Pick up the handset.
2.Press one of the
3.The phone will dial the numbers you stored into it.
Making Calls with Two-Touch Speed Dial Locations
1.Pick up the handset.
2.Press the AUTO button first, then press the stored
3.The phone will dial the numbers you stored into it.
9