Lenoxx Electronics PH-543 operating instructions Telephone Installation, Installing Batteries

Page 8

GETTING STARTED

Step 2: Telephone Installation

INSTALLING BATTERIES

Before you connect the phone cords, follow these steps to install the batteries:

1.Push down the battery door tab with a pen or other pointed object and lift the battery door out (Fig. 1).

2.Insert 3 size “AA” alkaline batteries as shown inside the battery compartment (Fig. 2). (The negative side (–) of the battery touches the battery spring.)

3.Replace the battery door and snap it shut (Fig. 3).

Fig. 1

Fig. 2

Fig. 3

CAUTION

Make sure that the telephone line cord is disconnected before opening the battery door.

Replace the batteries when the LOW BATTERY INDICATOR appears in the display or when the display gets dim.

When the batteries are dead, the display will not show anything. You can still make or receive calls, but you can’t use the Caller ID functions.

When the batteries are dead, your call data and memories could be erased.

CONNECTING THE TELEPHONE

1. Connect the COILED HANDSET CORD to the bottom of the handset and the bottom of the base (Step 1).

2. Connect the straight telephone line cord to the LINE CORD jack and telephone outlet on the wall (step 2). (If you want to mount the telephone on the wall, refer to Wall Mounting instruction of this booklet)

3. Route the LINE CORD into the channel on the bottom of the base.

Step 2

Step 1

If your telephone outlet is not modular, contact your telephone company for assistance.

6

IB-PH543(168F)-WM-E-051203

Image 8
Contents Memory Caller ID Trim Phone Model PH-543 Operating InstructionsTable of Contents Important Safety Instructions Battery Safety Instructions FCC Information FCC RegistrationImportant FCC Information Ringer Equivalence NO. RENLocation of Controls Checking the Package Contents Getting StartedTelephone Installation Installing BatteriesSetting up the telephone Receiving a Call BasicsMaking a Call Memory Dialing Storing Phone Number into MemoryMaking Calls with One-Touch Speed Dial Buttons Making Calls with Two-Touch Speed Dial LocationsViewing the Caller ID List Caller ID Features Understanding the Caller ID serviceWhen You Receive a Call Caller ID Features Calling back from the Caller ID List Storing Phone Numbers from the Caller ID ListTo Delete ALL the Caller ID Memories Using Message Waiting / MailboxTo Delete the Caller ID Memory ONE by ONE Wall Mounting Wall Mounting Without a Modular Wall Phone PlateTrouble Shooting Problems CheckTrouble Shooting Limited Warranty For Customer ServiceLenoxx Electronics CORP., 2 Germak DRIVE, CARTERET, N.J Lenoxx Electronics Corp Germak Drive