CALLER ID FEATURES Deleting the Data from the Caller ID List
TO DELETE THE CALLER ID MEMORY ONE BY ONE
1.Display the caller’s ID you want to delete.
2.Press the DELETE button twice quickly, the display shows the next or previous call, and the data is deleted.
TO DELETE ALL THE CALLER ID MEMORIES
1.Make sure that all NEW calls have been reviewed (NEW CALL INDICATOR at the back of the handset does not flash).
2.Press the UP or DOWN button to display any call, make sure the display does not show “END OF LIST ”.
3.Press and hold the DELETE button down for 6 seconds. Display changes to “NO CALLS ”, all Caller ID memories are deleted.
NOTE: You cannot delete all the Caller ID memories when there are any new calls remaining (not viewed yet), or when “END OF LIST” is shown in the display.
Using Message Waiting / Mailbox
To use the Message Waiting feature, you must subscribe to this service if available from your local telephone company.
This phone will only respond to FSK type of message delivery.
1.If the message is sent by the telephone company which is
preceded by a ring, the MESSAGE WAITING symbol 
will appear in the display, and the NEW CALL INDICATOR will flash after 20 seconds.
2.After you retrieve your message(s), the telephone company will send a clear signal (by a ring) to your phone. The symbol
will turn off until a new message is received. The NEW CALL INDICATOR will stop flashing. Sometimes the telephone company will not send a message clear signal to your phone, then you will have to clear the message waiting symbol manually by holding the DELETE button, then pressing the UP button.
12