WALL MOUNTING
This phone can be mounted on a wall phone plate. If you do not have a modular wall phone plate installed, please consult with your phone company or installer to get one, or see the following for installation without a wall plate.
1. Use the SHORT STRAIGHT WALL CORD, and plug one end
into the rear of the phone.
2. Plug the other end into the
WALL JACK. 3. Put the phone over the WALL
PLATE, make sure both posts fit into slots on the back of the phone. Then slide down to lock the phone into the WALL PLATE.
WALL MOUNTING WITHOUT A MODULAR WALL PHONE PLATE
Follow these instructions to mount the phone on the wall without a wall plate:
1.Locate a wall stud. If it is possible to utilize a wall stud for mounting, dry wall expanders or a similar type fastener is recommended. Consult your local hardware store for details.
2. Drill 2 holes | (100 mm) |
apart.
3.Put a screw into each hole and
leave 
(5mm) of the head exposed to mount the phone (screws are not included).
Drill one hole
Make sure the space between
holes is 100 mm
Drill one hole
4.Connect the straight long cord to the phone and jack.
5.Place the TELEPHONE BASE on the 2 mounting screws and gently push down to lock into place.
IMPORTANT
Before mounting the phone onto the wall, select a wall area with sufficient strength. If mounting on the wallboard or in an area of questionable strength, locate a stud for maximum support of your telephone.
13