
If you want to register ahandset to a new base, it has to be first
COMPLETING CALLS
There are three ways to complete a call:
A. Dial
1. Press .
3.Dial the number you want once you hear the dial tone.
4.The number appears on the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).
5. To finish the call, press | or place the handset in the base unit or the charger unit. |
B. Redial
1.Press .
2.The number you have most recently called appears in first place in the display.
3. | Use | or | to search for the number you need. |
4. | Press |
| . |
5.The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).
6. | To finish the call, press | or replace the handset in the base unit or the charger unit. | |
C.Using the Phonebook |
| ||
1. | Press | . |
|
2. | The first number in the phonebook appears on the display. | ||
3. | Press or | to browse the phonebook. | |
4. | Press . |
|
|
5.The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press | or replace the handset in the base unit or the handset charger unit. |
ANSWERING CALLS
The handset starts ringing during an incoming call; you have the following options to answer:
a. Press to pick up the call.
Firmware version 1.0.0.23 | DP715/DP710 User Manual | Page 29 of 52 |