Grandstream Networks HandyTone-488 user manual Configuration Guide

Page 15

HandyTone-488 User Manual

Grandstream Networks, Inc.

6Configuration Guide

6.1Configuring HandyTone-488 WAN IP through Voice Prompt

6.1.1DHCP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use DHCP.

6.1.2STATIC IP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use STATIC IP mode, then use option 02, 03, 04 to set up HandyTone-488’s IP, Subnet Mask, Gateway respectively.

6.2Configuring HandyTone-488 with Web Browser

HandyTone-488 series ATA has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the HandyTone-488 through a Web browser such as Microsoft’s IE and AOL’s Netscape.

6.2.1Access the Web Configuration Menu

The HandyTone-488 HTML configuration menu can be accessed via LAN or WAN port:

•From the LAN port use the default LAN gateway IP address: http://192.168.2.1

•The WAN port HTML configuration option is disabled by default from factory. To access the HTML configuration menu from the WAN port, first enable the “WAN side HTTP access” option by accessing the configuration via LAN port. With the WAN side HTTP access enabled, then get the WAN IP address of the HandyTone-488 through section 5.1 with menu option 02. The HandyTone-488’s Web Configuration page can be accessed by the following URI via WAN port:

http://HandyTone-IP-Address,

where the HandyTone-IP-Addressis the WAN IP address of the HandyTone-488.

6.2.2End User Configuration

Once this HTTP request is entered and sent from a Web browser, the HandyTone-488 will respond with the following login screen:

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents For SW Release Version HandyTone-488Table of Contents Welcome Top View Side Views InstallationGrandstream Networks, Inc Safety Compliances What is Included in the PackageProduct Overview Key FeaturesModel HandyTone-488 Hardware SpecificationGet Familiar with Voice Prompt Basic OperationsInput Meaning Make Phone CallsCalling phone or extension numbers Direct IP callsVoice Prompt with option 47, then Blind TransferAttended Transfer VoIP-to-PSTN Calls Call Features Call Features Table Send and Receive Pstn CallsPstn Pass Through LED Light Pattern IndicationRinging Configuration Guide Configuring HandyTone-488 WAN IP through Voice PromptConfiguring HandyTone-488 with Web Browser Password End User DMZ IP PPPoE Link Up Advanced User ConfigurationSystem Up Time RegisteredFXS Port General Misc Settings URI or IPport Features AuthenticatePassword Name Enable CallVoice Frames per Dtmf PayloadType Preferred VocoderLayer 2 QoS Reboot Layer 3 QoSTimeout Use # as Unregister onKeep-alive Tftp UpgradeHttp Upgrade Auto UpgradeAccess Disable CallUpdate Special FeatureRebooting the HandyTone-488 from Remote Saving the Configuration ChangesConfiguration through a Central Server Software Upgrade Upgrade through HttpUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting
Top Page Image Contents