Grandstream Networks HandyTone-488 user manual Saving the Configuration Changes

Page 28

HandyTone-488 User Manual

Grandstream Networks, Inc.

6.2.4Saving the Configuration Changes

Once a change is made, users should press the “Update” button in the Configuration page. The HandyTone-488 will then display the following screen to confirm that the changes have been saved.

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS

Your configuration changes have been saved.

They will take effect on next reboot.

All Rights Reserved Grandstream Networks, Inc. 2004

Users are recommended to power cycle the HandyTone-488 after seeing the above message.

6.2.5Rebooting the HandyTone-488 from Remote

The administrator of the HandyTone-488 can remotely reboot the HandyTone ATA by pressing the “Reboot” button at the bottom of the configuration page. Once done, the following screen will be displayed to indicate that rebooting is underway.

Grandstream Device Configuration

The device is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

All Rights Reserved Grandstream Networks, Inc. 2004

At this point, the user can relogin to the HandyTone-488 after waiting for about 30 seconds.

28

Image 28

Contents HandyTone-488 For SW Release VersionTable of Contents Welcome Installation Top View Side ViewsGrandstream Networks, Inc What is Included in the Package Safety CompliancesKey Features Product OverviewHardware Specification Model HandyTone-488Basic Operations Get Familiar with Voice PromptMake Phone Calls Calling phone or extension numbersDirect IP calls Input MeaningBlind Transfer Voice Prompt with option 47, thenAttended Transfer Call Features Call Features TableSend and Receive Pstn Calls VoIP-to-PSTN CallsLED Light Pattern Indication Pstn Pass ThroughRinging Configuring HandyTone-488 WAN IP through Voice Prompt Configuration GuideConfiguring HandyTone-488 with Web Browser Password End User DMZ IP Advanced User Configuration System Up TimeRegistered PPPoE Link UpFXS Port General Misc Settings URI or IPport Authenticate Password NameEnable Call FeaturesDtmf Payload Type PreferredVocoder Voice Frames perReboot Layer 3 QoS Timeout Use # asUnregister on Layer 2 QoSTftp Upgrade Http UpgradeAuto Upgrade Keep-aliveDisable Call UpdateSpecial Feature AccessSaving the Configuration Changes Rebooting the HandyTone-488 from RemoteConfiguration through a Central Server Upgrade through Http Software UpgradeUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting