Grandstream Networks HandyTone-488 System Up Time, Registered, PPPoE Link Up, Detected NAT Type

Page 19

HandyTone-488 User Manual

Grandstream Networks, Inc.

MAC Address

The device ID, in HEX format. This is a very important ID for ISP

 

troubleshooting.

WAN IP Address

This field shows WAN port IP address.

Product Model

This field contains the product model info.

Software Version

Program: This is the main software release, its number is always

 

used for firmware upgrade.

 

Bootloader: This is normally not changed.

 

HTML: This is the user interface, normally not changed.

 

VOC: This is the codec program, normally not changed.

System Up Time

This field indicates how long the device has been up since the last

 

reboot.

Registered

This field indicates whether the device is registered to the SIP server.

PPPoE Link Up

This field shows whether the PPPoE connection is enabled or not.

Detected NAT Type

This field shows what kind NAT the HandyTone is connected to via its

 

WAN port. It is based on STUN protocol.

6.2.3Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section

6.2.1to get to the following login page. The password is case sensitive and the factory default password for Advanced User is “admin”.

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2004

19

Image 19
Contents For SW Release Version HandyTone-488Table of Contents Welcome Top View Side Views InstallationGrandstream Networks, Inc Safety Compliances What is Included in the PackageProduct Overview Key FeaturesModel HandyTone-488 Hardware SpecificationGet Familiar with Voice Prompt Basic OperationsInput Meaning Make Phone CallsCalling phone or extension numbers Direct IP callsBlind Transfer Voice Prompt with option 47, thenAttended Transfer VoIP-to-PSTN Calls Call FeaturesCall Features Table Send and Receive Pstn CallsPstn Pass Through LED Light Pattern IndicationRinging Configuring HandyTone-488 WAN IP through Voice Prompt Configuration GuideConfiguring HandyTone-488 with Web Browser Password End User DMZ IP PPPoE Link Up Advanced User ConfigurationSystem Up Time RegisteredFXS Port General Misc Settings URI or IPport Features AuthenticatePassword Name Enable CallVoice Frames per Dtmf PayloadType Preferred VocoderLayer 2 QoS Reboot Layer 3 QoSTimeout Use # as Unregister onKeep-alive Tftp UpgradeHttp Upgrade Auto UpgradeAccess Disable CallUpdate Special FeatureRebooting the HandyTone-488 from Remote Saving the Configuration ChangesConfiguration through a Central Server Upgrade through Http Software UpgradeUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting