Grandstream Networks HandyTone-488 user manual End User

HandyTone-488 User Manual Grandstream Networks, Inc.

NAT/DHCP Server Information & Configuration:

Cloned WAN MAC

Addr:

LAN Subnet Mask:

LAN DHCP Base

IP:

DHCP IP Lease

Time:

DMZ IP:

(in hex format)

255.255.255.0		(default is 255.255.255.0)
192.168.2.1		(base IP for the LAN port, default is 192.168.2.1)
120	(in units of hours, default is 120 hours or 5 days)

Port Forwarding:

WAN port WAN port WAN port WAN port WAN port WAN port WAN port WAN port

0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port
0	LAN IP	LAN port

Update

All Rights Reserved Grandstream Networks, Inc. 2004

0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"
0	Protocol	" UDP Only"

End User	This contains the password to access the Web Configuration Menu.
Password	This field is case sensitive.
IP Address	There are 2 modes under which the HandyTone ATA can operate:
	- If DHCP mode is enabled, then all the field values for the Static IP
	mode are not used (even though they are still saved in the Flash
	memory.) The HandyTone ATA will acquire its IP address from the
	first DHCP server it discovers from the LAN it is connected.
	To use the PPPoE feature the PPPoE account settings need to be
	set. The HandyTone will attempt to establish a PPPoE session if any
	of the PPPoE fields is set.
	- If Static IP mode is enabled, then the IP address, Subnet Mask,
	Default Router IP address, DNS Server 1 (primary), DNS Server 2
	(secondary) fields will need to be configured. These fields are reset to
	zero by default.

17