Grandstream Networks 286 user manual Call Features, 6 3-way Conferencing, Bell style conference

HandyTone -286 User Manual Grandstream Networks, Inc.

•When Attended Transfer failed, if A hangs up, the HandTone-286 will ring user A again to remind A that B is still on the call. A can pick up the phone to restore conversation with B.

5.2.63-way Conferencing

HandyTone-286 supports 3-way conference in two modes, which is configurable on the web configuration.

5.2.6.1 Bell style conference

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

2.A dials C’s number then # (or wait for 4 seconds).

3.If C answers the call, then A presses “flash” to bring B, C in the conference.

4.If C does not answer the call, A can press “flash” back to talk to B.

5.2.6.2 Non-bell style conference

Use *23 as conference code to initiate conference. Assuming that call party A and B are in conversation. A wants to bring C in a conference:

5.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

6.A dials *23 followed by C’s number then # (or wait for 4 seconds).

7.If C answers the call, then A presses “flash” to bring B, C in the conference.

8.If C does not answer the call, A can press “flash” back to talk to B.

5.3Call Features

Following table shows the call features of HandyTone-286.

Key	Call Features
*23	3-way conference code.
*87	Bland transfer
*30	Block Caller ID (for all subsequent calls)
*31	Send Caller ID (for all subsequent calls)
*67	Block Caller ID (per call)
*82	Send Caller ID (per call)
*50	Disable Call Waiting (for all subsequent calls)
*51	Enable Call Waiting (for all subsequent calls)

13