Grandstream Networks 286 user manual Configuration File Download

Page 36

HandyTone -286 User Manual

Grandstream Networks, Inc.

the TFTP server is connected to the device’s LAN port, the firmware upgrade will not work by design.

7.2Configuration File Download

Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through TFTP or HTTP. “Config Server Path” is the TFTP or HTTP server path for configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server Path” can be same or different from the “Firmware Server Path”.

A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with “Admin Password” in the ADVANCED SETTINGS page. For a detailed parameter list, please refer to the corresponding firmware release configuration template.

When Grandstream Device boots up or reboots, it will issue request for configuration file named “cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the MAC address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in lower cases.

7.3Firmware and Configuration File Prefix and Postfix

Starting from firmware version 1.0.7.11 for HandyTone-286 Rev 3.0, adding prefix and postfix for both firmware and configuration file is supported.

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and Postfix. This makes it the possible to store ALL of the firmware with different version in one single directory. Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one directory.

In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is set to “Yes”, the device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

7.4Managing Firmware and Configuration File Download

When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 (Auto Check Interval, in minutes, default and minimum is 60 minutes) to have the devices periodically check with either Firmware Server or Config Server, whenever they are defined. This allows the device periodically check if there are any new changes need to be taken on a scheduled time. By defining different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents HandyTone-286 Rev For Firmware VersionTable of Contents Restore Factory Default Setting Grandstream Networks, Inc388 Welcome Installation What is Included in the Package Safety CompliancesWarranty Key Features Product OverviewHardware Specification Model HandyTone-286Basic Operations Get Familiar with Key Pad and Voice PromptMake Phone Calls Calling Phone or Extension NumbersDirect IP Calls Call HoldCall Waiting Voice Prompt with option 47, thenCall Transfer Blind TransferAttended Transfer Call Features 6 3-way ConferencingBell style conference Non-bell style conferenceFax LED Light Pattern IndicationRinging Configuration Guide Configuring HandyTone-286 IP through Voice PromptConfiguring HandyTone-286 with Web Browser End User Configuration Registered Yes PPPoE Link Up disabledIP Address Product Model HT286 REV Software VersionNAT End User Password Web Port NAT Mapped PortStatistical Status IP Address Time ZoneUpdate PPPoE password Dhcp hostnameDhcp domain Dhcp vendor classAdvanced User Configuration Dial Plan Prefix Use Bell-style Yes if Yes, *23 will be disabled Override MTU Size Authenticate SIP ServerHome NPA Preferred VocoderFax Mode G723 RateILBC frame size ILBC payload typeReboot TimeoutUser ID is phone NumberMWI Special Features Caller ID SchemeOnhook Voltage Polarity ReversalTimer Session ExpirationMin-SE Caller RequestForce Timer Firmware UpgradePath Config Server Path Postfix Config File Prefix Saving the Configuration Changes Rebooting the HandyTone-286 from Remote Volume AmplificationConfiguration through a Central Server Click to reloginSoftware Upgrade with Tftp Firmware Upgrade through TFTP/HTTPConfiguration File Download Firmware and Configuration File Prefix and PostfixManaging Firmware and Configuration File Download Restore Factory Default Setting StepGlossary of Terms DNS DidDSP DtmfEcho Cancellation FXSDhcp 323IP-PBX IVRMTU NTPPstn RtcpRTP SDPTftp UDPVAD Vlan
Top Page Image Contents