Grandstream Networks 286 Dhcp hostname, Dhcp domain, Dhcp vendor class, PPPoE account ID, Time

End User	This contains the password to access the Web Configuration Menu. This field is
Password	case sensitive with max. 25 characters

HandyTone -286				.
		User Manual	Grandstream Networks, Inc
Web Port		This is the device’s internal HTTP server port. Default is 80.
IP Address		There are 2 modes under which the IP phone can operate:
		- If DHCP mode is enabled, then all the field for the Static IP mode are not
		used (even though they are still saved in the Flash memory) and the IP phone
		will acquire its IP address from the DHCP server in the network.
		To use PPPoE feature please set the PPPoE account settings if the HT-286 is
		connected directly to a DSL modem. The HT-286 will attempt to establish a
		PPPoE session if any of the PPPoE fields is set.
		- If Static IP mode is selected, then the IP address, Subnet Mask, Default
		Router IP address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields
		will need to be configured.
DHCP hostname		This option specifies the name of the client. This field is optional but may be
		required by some Internet Service Providers. Default is blank.
DHCP domain		This option specifies the domain name that client should use when resolving
		hostnames via the Domain Name System. Default is blank.
DHCP vendor class		This option is used by clients and servers to exchange vendor-specific
ID		information. Default is blank.
PPPoE account ID		PPPoE username. Fill this field if your ISP requires you to use a PPPoE (Point
		to Point Protocol over Ethernet) connection.
PPPoE password		PPPoE account password.
Time Zone		This parameter controls how date/time is displayed according to the specified
		time zone.
Daylight	Savings	This parameter controls whether the displayed time will be daylight savings
Time		time or not. If set to “Yes” and the Optional Rule is empty, then the displayed
		time will be 1 hour ahead of normal time. The “Automatic Daylight Saving
		Time Rule” shall have the following syntax:
		start-time;end-time;saving
		Both start-time and end-time have the same syntax:
		month,day,weekday,hour,minute
		month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
		day: [+-]1,2,3,..,31
		weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight
		saving rule is not based on week days but based on the day of the month.
		hour: hour (0-23),
		minute: minute (0-59)
		If “weekday” is 0, it means the date to start or end daylight saving is at exactly
		the given date. In that case, the “day” value must not be negative. If “weekday”
		is not zero and “day” is positive, then the daylight saving starts on the first
		“day” the iteration of the weekday (1st Sunday, 3rd Tuesday etc).
		If “weekday” is not zero and “day” is negative, then the daylight saving starts
		on the last “day”th iteration of the weekday (last Sunday, 3rd last Tuesday etc).
		The saving is in the unit of 21minutes. The saving time may also be preceded by a
		negative (-) sign if subtraction is desired instead of addition.
		The default value for “Automatic Daylight Saving Time Rule” shall be set to
		“04,01,7,02,00;10,-1,7,02,00;60” which is the rule for US.
		l