Grandstream Networks Configuration Guide, Configuring HandyTone-286 IP through Voice Prompt

Page 16

HandyTone -286 User Manual

Grandstream Networks, Inc.

6Configuration Guide

6.1Configuring HandyTone-286 IP through Voice Prompt

6.1.1DHCP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-286 to use DHCP.

6.1.2STATIC IP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-286 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

6.1.3TFTP Server Address

Follow section 5.1 with voice menu option 06 to configure the IP address of the TFTP server.

6.2Configuring HandyTone-286 with Web Browser

HandyTone-286 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allows a user to configure the HandyTone-286 through a Web browser such as Microsoft’s IE and AOL’s Netscape.

6.2.1Access the Web Configuration Menu

First, get the IP address of the HandyTone-286 through section 5.1 with menu option 02. Then access the HandyTone-286’s Web Configuration Menu using the following URI:

http:// HandyTone-IP-Address

where the HandyTone-IP-Addressis the IP address of the HandyTone-286.

NOTE:

•To type IP address into browser to get into the configuration page, please strip out the leading “0” as the browser will parse in octet. e.g.: if the IP address is: 192.168.001.014, please type in: 192.168.1.14.

16

Image 16

Contents HandyTone-286 Rev For Firmware VersionTable of Contents Grandstream Networks, Inc Restore Factory Default Setting388 Welcome Installation Safety Compliances What is Included in the PackageWarranty Key Features Product OverviewHardware Specification Model HandyTone-286Basic Operations Get Familiar with Key Pad and Voice PromptMake Phone Calls Calling Phone or Extension NumbersDirect IP Calls Call HoldCall Waiting Voice Prompt with option 47, thenBlind Transfer Call TransferAttended Transfer Call Features 6 3-way ConferencingBell style conference Non-bell style conferenceFax LED Light Pattern IndicationRinging Configuring HandyTone-286 IP through Voice Prompt Configuration GuideConfiguring HandyTone-286 with Web Browser End User Configuration Registered Yes PPPoE Link Up disabledIP Address Product Model HT286 REV Software VersionNAT End User Password Web Port NAT Mapped PortStatistical Status IP Address Time ZoneUpdate PPPoE password Dhcp hostnameDhcp domain Dhcp vendor classAdvanced User Configuration Dial Plan Prefix Use Bell-style Yes if Yes, *23 will be disabled Override MTU Size Authenticate SIP ServerHome NPA Preferred VocoderFax Mode G723 RateILBC frame size ILBC payload typeReboot TimeoutUser ID is phone NumberMWI Special Features Caller ID SchemeOnhook Voltage Polarity ReversalTimer Session ExpirationMin-SE Caller RequestForce Timer Firmware UpgradePath Config Server Path Postfix Config File PrefixSaving the Configuration Changes Rebooting the HandyTone-286 from RemoteVolume AmplificationConfiguration through a Central Server Click to reloginSoftware Upgrade with Tftp Firmware Upgrade through TFTP/HTTPFirmware and Configuration File Prefix and Postfix Configuration File DownloadManaging Firmware and Configuration File Download Restore Factory Default Setting StepGlossary of Terms DNS DidDSP DtmfEcho Cancellation FXSDhcp 323IP-PBX IVRMTU NTPPstn RtcpRTP SDPTftp UDPVAD Vlan