Grandstream Networks user manual Using BudgeTone-200 IP Phone, Getting Familiar with LCD / LED

Page 12

4Using BudgeTone-200 IP Phone

4.1Getting Familiar with LCD / LED

BudgeTone-200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED status reminder. Here is the display when all segments illuminate:

010

上午

AM

下午

PM

 

 

 

 

When the phone is in the normal idle state, the backlight is off. Whenever an event (call) occurs, the backlight will turn on automatically to bring the user’s attention. In addition, if Voice Mail configured and there is a VM waiting, the red LED will be blinking to remind user there is a Voice Mail in the Voice Mail server.

Icon

LCD Icon Definitions

 

 

Network Status Icon:

FLASH in the case of Ethernet link failure or the phone is not registered properly.

OFF if IP address or SIP server is not found ON if IP address and SIP server are located

Phone Status Icon:

OFF when the handset is on-hook

ON when the handset is off-hook

Speakerphone/Headset Status Icon:

FLASH when phone rings

OFF when the speakerphone/headset is off

ON when the speakerphone/headset is on

12

Image 12
Contents Grandstream Networks, Inc For Firmware VersionUsing BUDGETONE-200 IP PHONE…………………………… Configuration GUIDE………………………………………Firmware UPGRADE…………………………………………… Product OVERVIEW………………………………………………8Upgrade Through TFTP………………………………………… Welcome Installation What is Included in the PackageConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Using BudgeTone-200 IP Phone Getting Familiar with LCD / LEDIcon LCD Icon Definitions Page Getting Familiar with Keypad Menu CalledCallers MessageHandset, Speakerphone and Headset Mode Make Calls using NumbersMaking and Answering Phone Calls SEND/REDIALMake Calls using IP Address Answer an Incoming Call Call HoldCall Waiting and Call Flashing Call TransferConference Call Blind TransferAttended Transfer Call Features Checking Message and Message Waiting IndicationMute and Delete Page Configuration Guide Configuration with KeypadMenu Item Menu FunctionsMenu Item Menu Functions Display 7 G-711uDisplay 10 Phy Addr Configuration with Web Browser Access the Web Configuration MenuEnd User Configuration Grandstream Device Configuration Status Basic Advanced Account SettingsEnd User Password IP Address Time Zone DaylightWAN MAC LAN DhcpDhcp IP DMZ IPUpdate PPPoE Link Up disabled Cloned WAN MAC AddrLAN Dhcp Base IP Dhcp IP Lease TimeAdvanced User Configuration Admin Password Silence Suppression Voice Frames per TXDisable Call-Waiting Yes Use Quick IP-call mode Admin Timeout Use # asSilence SuppressionUpgrade Local RTPPort Use RandomDtmf Disable Call UpdateOption 42 to Override NTPUser part of an SIP address Authenticate ID Account ActiveAccount Name MyCompany Outbound ProxyUAC UAS Individual Account Settings Reboot Use DNS SRVUser ID is Phone NumberPage Page Saving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Firmware Upgrade Upgrade through HttpUpgrade through Tftp Page Restore Factory Default Setting StepAppendix I Glossary of Terms DNS DidDSP FqdnEcho Cancellation FXOFXS DhcpHttp IP-PBXIVR MTUNAT NTPOBP/SBC PstnSDP SIPStun TCPVlan VoIP