Grandstream Networks 200 Making and Answering Phone Calls, Handset, Speakerphone and Headset Mode

	Dial a new number inputted or Redial the number last
SEND/(RE)DIAL	dialed. After entering the phone number, pressing this
	key would force a call to go out immediately before
	timeout
SPEAKERPHONE	Enter hands-free mode

4.3 Making and Answering Phone Calls

4.3.1 Handset, Speakerphone and Headset Mode

The regular Handset mode can be switched with either the Speaker mode (Hand free) or the Headset mode, however, whenever the Headset is plugged in, Speaker mode will be switched to the Headset mode automatically.

Handset mode and Speakerphone/Headset mode cannot be enabled at the same time. Pressing the hook-switch or Speakerphone button would toggle the phone between these two modes.

To Switch between Handset and Speaker/Headset, simply press the Hook Flash in the Handset cradle or the Speaker button.

4.3.2 Make Calls using Numbers

There are FIVE ways to make phone calls:

•Pick up handset or press SPEAKERPHONE button, and then enter the phone numbers

•Press the SEND button directly to redial the number last called.

•Once pressed, the last dialed number will be displayed on the LCD as the corresponding DTMF tones are played out and an outgoing call is sent.

•Browse the CALLED/CALLER history and press the SEND/REDIAL button.

•Pick up the handset or press the speakerphone button, then press the “CALLED/CALLERS” button to browse thru the last 10 numbers dialed out. Once the desired number is identified and displayed on the LCD screen, press the SEND button and a new call to that displayed number will be sent out immediately.

Examples:

16