Grandstream Networks 200 user manual Cloned WAN MAC Addr, LAN Dhcp Base IP, Dhcp IP Lease Time

Page 29

Cloned WAN MAC Addr

LAN Subnet Mask

LAN DHCP Base IP

DHCP IP Lease Time

DMZ IP

Port Forwarding

Allow the user to set a specific MAC address. Set in Hex format.

Sets the LAN subnet mask. Default value is 255.255.255.0

Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1.

Value is set in units of hours. Default value is 120hr (5 Days.) The time IP address is assigned to the LAN clients.

Forward all WAN IP traffic to a specific IP address if no matching port is used by HandyTone-486 itself or in the defined port forwarding.

Allow the user to forward a matching (TCP/UDP) port to a specific LAN IP address with a specific (TCP/UDP) port.

In addition to the Basic Settings configuration page, end user also has access to the device Status page. The following is a screen shot of the device Status page. Details are explained next.

Grandstream Device Configuration

STATUS

BASIC SETTINGS

ADVANCED SETTINGS

ACCOUNT

MAC Address: 00.0B.82.08.3D.6E

IP Address: 192.168.1.113

Product Model: BT200

Software Version: Program-- 1.1.0.16 Bootloader-- 1.1.0.1

System Up Time: 0 day(s) 7 hour(s) 7 minute(s)

Registered: Account : Yes

PPPoE Link Up: disabled

detected NAT type is full cone

All Rights Reserved Grandstream Networks, Inc. 2004, 2005

29

Image 29

Contents For Firmware Version Grandstream Networks, IncConfiguration GUIDE……………………………………… Using BUDGETONE-200 IP PHONE……………………………Firmware UPGRADE…………………………………………… Product OVERVIEW………………………………………………8Upgrade Through TFTP………………………………………… Welcome Connecting Your Phone InstallationWhat is Included in the Package Warranty Safety CompliancesPage Product Overview Software Features Key FeaturesHardware Features Model BudgeTone-200 Hardware SpecificationIcon LCD Icon Definitions Using BudgeTone-200 IP PhoneGetting Familiar with LCD / LED Page Getting Familiar with Keypad Called MenuCallers MessageMake Calls using Numbers Handset, Speakerphone and Headset ModeMaking and Answering Phone Calls SEND/REDIALMake Calls using IP Address Call Hold Answer an Incoming CallCall Waiting and Call Flashing Call TransferAttended Transfer Conference CallBlind Transfer Mute and Delete Call FeaturesChecking Message and Message Waiting Indication Page Configuration with Keypad Configuration GuideMenu Item Menu FunctionsDisplay 7 G-711u Menu Item Menu FunctionsDisplay 10 Phy Addr End User Configuration Configuration with Web BrowserAccess the Web Configuration Menu Status Basic Advanced Account Settings Grandstream Device ConfigurationEnd User Password IP Address Time Zone DaylightLAN Dhcp WAN MACDhcp IP DMZ IPUpdate Cloned WAN MAC Addr PPPoE Link Up disabledLAN Dhcp Base IP Dhcp IP Lease TimeAdvanced User Configuration Silence Suppression Voice Frames per TX Admin PasswordDisable Call-Waiting Yes Use Quick IP-call mode Timeout Use # as AdminSilence SuppressionLocal RTP UpgradePort Use RandomDtmf Update Disable CallOption 42 to Override NTPAccount Active User part of an SIP address Authenticate IDAccount Name MyCompany Outbound ProxyUAC UAS Individual Account Settings Use DNS SRV RebootUser ID is Phone NumberPage Page Rebooting the Phone from Remote Saving the Configuration ChangesConfiguration through Central Provisioning Server Upgrade through Tftp Firmware UpgradeUpgrade through Http Page Step Restore Factory Default SettingAppendix I Glossary of Terms Did DNSDSP FqdnFXO Echo CancellationFXS DhcpIP-PBX HttpIVR MTUNTP NATOBP/SBC PstnSIP SDPStun TCPVoIP Vlan