Grandstream Networks 200 user manual Advanced User Configuration

Page 30

MAC Address

IP Address

Product Model

Software Version

System Up Time

Registered

PPPoE Link Up

Detected NAT

Type

The device ID, in HEX format. This is a very important ID for ISP troubleshooting.

This field shows LAN IP address of BudgeTone 200

This field contains the product model info.

•Program: This is the main software release, its number is always used for firmware upgrade.

•Bootloader: This is normally not changed.

This field shows system up time since the last reboot.

This field indicates whether the device is registered to the SIP server(s).

This field shows whether the PPPoE connection is up if connected to DSL modem.

This field shows what kind NAT the BudgeTone 200 is connected to via its LAN port. It is based on STUN protocol.

5.2.3 Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section 5.2.1 to get to the following login page. The password is case sensitive with a maximum length of 25 characters and the factory default password for Advanced User is “admin”.

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2004

30

Image 30

Contents Grandstream Networks, Inc For Firmware VersionFirmware UPGRADE…………………………………………… Using BUDGETONE-200 IP PHONE……………………………Configuration GUIDE……………………………………… Product OVERVIEW………………………………………………8Upgrade Through TFTP………………………………………… Welcome Installation What is Included in the PackageConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Using BudgeTone-200 IP Phone Getting Familiar with LCD / LEDIcon LCD Icon Definitions Page Getting Familiar with Keypad Callers MenuCalled MessageMaking and Answering Phone Calls Handset, Speakerphone and Headset ModeMake Calls using Numbers SEND/REDIALMake Calls using IP Address Call Waiting and Call Flashing Answer an Incoming CallCall Hold Call TransferConference Call Blind TransferAttended Transfer Call Features Checking Message and Message Waiting IndicationMute and Delete Page Menu Item Configuration GuideConfiguration with Keypad Menu FunctionsMenu Item Menu Functions Display 7 G-711uDisplay 10 Phy Addr Configuration with Web Browser Access the Web Configuration MenuEnd User Configuration End User Password IP Address Grandstream Device ConfigurationStatus Basic Advanced Account Settings Time Zone DaylightDhcp IP WAN MACLAN Dhcp DMZ IPUpdate LAN Dhcp Base IP PPPoE Link Up disabledCloned WAN MAC Addr Dhcp IP Lease TimeAdvanced User Configuration Admin Password Silence Suppression Voice Frames per TXDisable Call-Waiting Yes Use Quick IP-call mode Silence AdminTimeout Use # as SuppressionPort UpgradeLocal RTP Use RandomDtmf Option 42 to Disable CallUpdate Override NTPAccount Name MyCompany User part of an SIP address Authenticate IDAccount Active Outbound ProxyUAC UAS Individual Account Settings User ID is Phone RebootUse DNS SRV NumberPage Page Saving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Firmware Upgrade Upgrade through HttpUpgrade through Tftp Page Restore Factory Default Setting StepAppendix I Glossary of Terms DSP DNSDid FqdnFXS Echo CancellationFXO DhcpIVR HttpIP-PBX MTUOBP/SBC NATNTP PstnStun SDPSIP TCPVlan VoIP