Grandstream Networks 200 Call Features, Checking Message and Message Waiting Indication

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1.A presses the “CONFERENCE” button to get a dial tone and put B on hold

2.A dials C’s number then “SEND” key to make the call

3.If C answers the call, then A presses “CONFERENCE” button to bring B, C in the conference.

4.If C does not answer the call, A can press FLASH back to talk to B.

NOTE:

•During the conference, if B or C drops the call, the remaining two parties can still talk. However, if A the conference initiator hangs up, all calls will be terminated.

4.3.9Checking Message and Message Waiting Indication

When BudgeTone-200 is on-hook, pressing the MESSAGE button will trigger the phone to call the VM Server (VMS) configured for the Account.

The MWI (Message Waiting Indicator) LED will flash in red color in three quarters of a second when voicemail server sends message waiting information to BudgeTone-200.

4.3.10 Mute and Delete

When in conversation with an ACTIVE LINE, pressing “MUTE/DEL” will mute the conversation, that is, you can hear the other party but the other party cannot hear you. Pressing the button again will resume the conversation.

When dialing a number, press “MUTE/DEL” will delete the last entered digit.

When receiving incoming call, press “MUTE/DEL” will Reject the call and forward to voice mail.

4.4 Call Features

BudgeTone-200 series phone supports a list of call features: Caller ID Block (or Anonymous Call), Disable/Enable Call Waiting, Call Forward on Busy, Delay, or Unconditional, etc.

Following table shows the call features of BudgeTone-200 series phone.

20