Grandstream Networks BudgeTone-200 user manual Using the GXP SIP Enterprise Phone, LCD Icons

Page 10

Using the GXP SIP Enterprise Phone

GETTING FAMILIAR WITH THE LCD

BT200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED status reminder. Here is the display when all segments illuminate:

Figure 5: BT200 LCD

When the phone is in the normal idle state, the backlight is off. Whenever an event (call) occurs, the backlight will turn on automatically to bring the user’s attention. In addition, if Voice Mail configured and there is a VM waiting, the red LED will be blinking to remind user there is a Voice Mail in the Voice Mail server.

Table 5: LCD Icons

Icon	LCD Icon Definitions

	Connectivity Status / SIP Proxy/Server Icon:
	OFF – IP address of Sip server is not found
	ON – IP address of Sip server are located
	Blinking –Ethernet link failure or the phone is not registered properly

	Phone Status Icon:
	OFF when the handset is on-hook
	ON when the handset is off-hook

	Speaker Phone Status Icon:
	FLASH when phone rings
	OFF when the speakerphone is off
	ON when the speakerphone is on

	Handset and Speakerphone/Headset Volume Icons:
	0-7 scales to adjust handset / speakerphone volume

Grandstream Networks, Inc.	BT200 User Manual	Page 10 of 33
	Firmware 1.1.5.15	Last Updated: 01/2008

Image 10

Contents BudgeTone-200 SIP Phone Table of Figures GUI Interface Examples Welcome Connecting Your Phone InstallationWhat is Included in the Package BT200 ConnectorsSafety Compliances WarrantyProduct Overview Hardware Specifications BT200 Technical SpecificationsFirmware UpgradesServer Features Security AdvancedGetting Familiar with the LCD Using the GXP SIP Enterprise PhoneLCD Icons Time Icon Real-time ClockCall Logs IP Address Separator Icons Numerical Numbers and CharactersGetting Familiar with Keypad LCDBT200 Keypad Buttons Key Button Key Button DefinitionsMake Calls using IP Address Handset, Speakerphone and Headset ModeMake Calls using Numbers Making Phone CallsMENUkey 192 168 000 Quick IP Call ModeSetting up the phone to make Quick IP calls For exampleCall Waiting and Call Flashing Answer an Incoming CallCall Hold Call TransferConference Call Call FeaturesBT200 Call Features Checking Message and Message Waiting IndicationCancel Unconditional Call Forward Disable Call Waiting per CallEnable Call Waiting per Call Cancel Busy Call ForwardUsing the Keypad Configuration GuideConfiguration VIA Keypad Key Pad Configuration MenuFactory Reset Access the Web Configuration MenuConfiguration VIA WEB Browser DefinitionsGrandstream Networks, Inc Device Configuration Status Device Configuration Basic SettingsAdvanced Settings ILBC payload Timeout Use # asILBC frame size Type SilencePort AuthenticateUse Random Keep-aliveOffhook Auto UpgradeAutomatic Dial Dtmf PayloadSIP Account Settings User ID is Phone Un-register on RebootRetry Wait Time SIP T1 Timeout NumberDisable Call Log Delayed Call ForwardEnable Call Features Caller Request TimerSaving the Configuration Changes Rebooting the Phone RemotelyFirmware Upgrade Through TFTP/HTTP Software Upgrade & CustomizationWeb Configuration Interface Key Pad MenuConfiguration File Download Managing Firmware and Configuration File DownloadInstructions for local Tftp Upgrade Restore Factory Default Setting Instructions for Restoration