Grandstream Networks BudgeTone-200 Saving the Configuration Changes, Rebooting the Phone Remotely

Page 30

 

Auto Answer

Default is No. If set to “Yes”, BT200 will automatically switch on speaker to

 

 

answer the incoming call. Set to Intercom/Paging mode, it will answer the call

 

 

based on the SIP info header from the server.

 

 

 

 

 

 

 

Allow Auto Answer by

If the Call-Info header contains answer-after=0, the call be answered

 

Call-Info

automatically (so called paging mode).

 

 

 

 

 

 

 

Turn off speaker on

When BYE is received, the phone will turn off its speaker automatically.

 

remote disconnect

 

 

 

 

 

 

 

 

Check SIP User ID for

Check the SIP User ID in Request URI. If they don’t match, the call will be

 

incoming INVITE

rejected.

 

 

 

 

 

 

 

Refer-To Use Target

Default is NO. If set to YES, then for Attended Transfer, the “Refer-To” header

 

Contact

uses the transferred target’s Contact header information.

 

 

 

 

 

 

 

Disable Multiple Media

Default is No.

 

Attribute in SDP

 

 

 

 

 

 

 

 

Preferred Vocoder

BT200 supports up to 5 different Vocoder types including G.711(a/µ) (also known

 

 

as PCMU/PCMA), GSM, G.723.1, G.729A/B.

 

 

Configure Vocoders in a preference list that is included with the same preference

 

 

order in SDP message. Enter the first Vocoder in this list by choosing the

 

 

appropriate option in “Choice 1”. Similarly, enter the last Vocoder in this list by

 

 

choosing the appropriate option in “Choice 8”.

 

 

 

 

 

 

 

SRTP Mode

Enable SRTP mode based on selection. Default is No.

 

 

 

 

 

 

 

 

 

 

Special Feature

Default is Standard. Choose the selection to meet special requirements from Soft

 

 

Switch vendors.

 

 

 

SAVING THE CONFIGURATION CHANGES

After the user makes a change to the configuration, press the “Update” button in the Configuration Menu. The web browser will then display a message window to confirm saved changes.

Grandstream recommends reboot or power cycle the IP phone after saving changes.

REBOOTING THE PHONE REMOTELY

Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The web browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again.

Grandstream Networks, Inc.

BT200 User Manual

Page 30 of 33

 

Firmware 1.1.5.15

Last Updated: 01/2008

Page 29 Page 31
Image 30
Page 29 Page 31
Contents BudgeTone-200 SIP Phone Table of Figures GUI Interface Examples Welcome Connecting Your Phone InstallationWhat is Included in the Package BT200 ConnectorsSafety Compliances WarrantyProduct Overview Hardware Specifications BT200 Technical SpecificationsFirmware UpgradesServer Features Security AdvancedUsing the GXP SIP Enterprise Phone Getting Familiar with the LCDLCD Icons Time Icon Real-time ClockCall Logs IP Address Separator Icons Numerical Numbers and CharactersGetting Familiar with Keypad LCDBT200 Keypad Buttons Key Button Key Button DefinitionsMake Calls using IP Address Handset, Speakerphone and Headset ModeMake Calls using Numbers Making Phone CallsMENUkey 192 168 000 Quick IP Call ModeSetting up the phone to make Quick IP calls For exampleCall Waiting and Call Flashing Answer an Incoming CallCall Hold Call TransferConference Call Call FeaturesBT200 Call Features Checking Message and Message Waiting IndicationCancel Unconditional Call Forward Disable Call Waiting per CallEnable Call Waiting per Call Cancel Busy Call ForwardUsing the Keypad Configuration GuideConfiguration VIA Keypad Key Pad Configuration MenuFactory Reset Access the Web Configuration MenuConfiguration VIA WEB Browser DefinitionsGrandstream Networks, Inc Device Configuration Status Device Configuration Basic SettingsAdvanced Settings ILBC payload Timeout Use # asILBC frame size Type SilencePort AuthenticateUse Random Keep-aliveOffhook Auto UpgradeAutomatic Dial Dtmf PayloadSIP Account Settings User ID is Phone Un-register on RebootRetry Wait Time SIP T1 Timeout NumberDisable Call Log Delayed Call ForwardEnable Call Features Caller Request TimerSaving the Configuration Changes Rebooting the Phone RemotelyFirmware Upgrade Through TFTP/HTTP Software Upgrade & CustomizationWeb Configuration Interface Key Pad MenuManaging Firmware and Configuration File Download Configuration File DownloadInstructions for local Tftp Upgrade Restore Factory Default Setting Instructions for Restoration
Top Page Image Contents