Grandstream Networks BudgeTone-200 Access the Web Configuration Menu, Definitions, Factory Reset

Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones.

11Display “[11]trANSPOrt”

Press MENU to select SIP Transport.

Factory Reset Display “ -- rESEt --”. Please be very careful when using this function. Two options: factory reset or manual reboot.

Factory Reset:

1.Key in the physical / MAC address on back of the phone.

2.Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will be erased.

Manual Reboot: Press MENU without keying anything.

Others When phone is powered on and time is displayed

Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone volume, from 0 (off) to 7 (maximum), off and on hook to set

Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust the speakerphone/headset or handset volume

CONFIGURATION VIA WEB BROWSER

The BT200 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s IE or Mozilla Firefox.

Access the Web Configuration Menu

To access the phone’s Web Configuration Menu

•Connect the computer to the same network as the phone1

•Make sure the phone is turned on and shows its IP-address

•Start a Web-browser on your computer

•Enter the phone’s IP-address in the address bar of the browser2

•Enter the administrator’s password to access the Web Configuration Menu3

1The Web-enabled computer has to be connected to the same sub-network as the phone. This can easily be done by connecting the computer to the same hub or switch as the phone is connected to. In absence of a hub/switch (or free ports on the hub/switch), please connect the computer directly to the phone using the PC-port on the phone.

2If the phone is properly connected to a working Internet connection, the phone will display its IP address. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0-255. You will need this number to access the Web Configuration Menu. e.g. if the phone shows 192.168.0.60, please use “http://192.168.0.60” in the address bar your browser.

3The default administrator password is “admin”; the default end-user password is “123”.

NOTE: When changing any settings, always SUBMIT them by pressing the button on the bottom of the page. Reboot the phone to have the changes take effect. If, after having submitted some changes, more settings have to be changed, press the menu option needed.

Definitions

Grandstream Networks, Inc.	BT200 User Manual	Page 20 of 33
	Firmware 1.1.5.15	Last Updated: 01/2008