Grandstream Networks BudgeTone-200 user manual Advanced Settings

Daylight Savings Time	This parameter controls time displayed in daylight savings time. If set to “Yes”, then the
	displayed time will be 1 hour ahead of normal time.

The “Optional Rule” is configured to automatically adjust the Daylight Savings Time (DST) based on the rule set in this field.

Rule Syntax:

•start-time; end-time; saving

•Both start-time and end-time have the same syntax: month,day,weekday,hour,minute o month: 1,2,3,..,12 (for Jan, Feb, .., Dec)

o day: [+-]1,2,3,..,31

o weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight saving rule is not based on week days but based on the day of the month.

o hour: hour (0-23), minute: minute (0-59)

If “weekday” is 0, it means the date to start or end daylight saving is at exactly the given date. In that case, the “day” value must not be negative. If “weekday” is not zero and “day” is positive, then the daylight saving starts on the first “day” the iteration of the weekday (e.g.: 1st Sunday, 3rd Tuesday etc). If “weekday” is not zero and “day” is negative, then the daylight saving starts on the last “day” the iteration of the weekday (e.g.: last Sunday, 3rd last Tuesday etc).

		The saving is in the unit of minutes. The saving time may also be preceded by a negative (-)
		sign if subtraction is desired instead of addition.
		The default value is set for US, the “Automatic Daylight Saving Time Rule” shall be set to
		“3,2,7,2,0;11,1,7,2,0;60”
		Examples
		US/Canada where daylight saving time is applicable:
	03,02,7,02,00;11,1,7,02,00;60
		This means the daylight saving time starts from the second Sunday of March at 2AM and
		ends the first Sunday of November at 2AM. The saving is 60 minutes.
Date Display Format		Choose one of the following formats:
		•	Year-Month-Day
		•	Month-Day-Year
		• Day-Month-Year
Display Account Name		Choose to display Account Name or date on LCD.
instead of Date
Mute Speaker Ringer		Default is No. This field lets user to choose whether to ring the phone Speaker
in Headset Mode		when headset is connected.

Advanced User configuration includes not only the end user configuration, but also advanced configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.

Table 11: Advanced Settings

Admin	Administrator password. Only the administrator can access the “Advanced Settings” and
Password	“Account Settings” page. Password field is purposely blank for security reasons after
	clicking update and saved. The maximum password length is 25 characters.
G723 rate	Encoding rate for G723 codec. By default, 6.3kbps rate is set.
Grandstream Networks, Inc.		BT200 User Manual	Page 23 of 33
		Firmware 1.1.5.15	Last Updated: 01/2008