Cisco Systems CP7936RF warranty Startup Sequence, Sequence Step LCD Screen Message Display

Step 4 Connect the power supply unit to the AC adapter port on the PIM, and plug the other end into a standard electrical power outlet in the wall.

Step 5 If you are using the External Microphone Kit, connect each of the microphone extensions to the microphone jacks installed on the bottom of the

Cisco Unified IP Conference Station 7936. See Figure 2 for an illustration of this connection.

Tip If you do not correctly connect the cables, PIM, power supply, and the microphone extensions, the IP Conference Station will not work.

Use of non-Cisco-certified components may not work and may void the IP Conference Station product warranty.

Startup Sequence

During the startup sequence, the LCD screen display shows the following messages.

Sequence Step	LCD Screen Message Display
Startup—The startup process occurs about	Cisco Systems, Inc.
15 seconds after power up.	Polycom Technology
	Copyright 2003
Configuring IP address—These messages appear	Configuring IP
when the protocol is configuring the IP address.	Press Menu to Reconfigure
TFTP configuration—This message appears when	Station IP: IP address
connectivity is established with the TFTP server.	Contacting: TFTP Server
Cisco Unified CallManager configuration—This	Opening: Cisco CallManager IP address
message appears when connectivity is established
with the Cisco Unified CallManager.
Cisco Unified CallManager registration—This	Registering
message appears while the device is registering
with the Cisco Unified CallManager.
Initialization complete.	Press the Phone Key to get a dial tone

14