Volume Button, Redial/Pausebutton, Hold Button

To Dial APhone Number In Memory

1. Lift the handset or press speakerphone and wait for a dial tone.

2. Press any memory location.

• To dial an auto memory button (located on right-band side of base) - Press the desired auto memory button (1, 2, 3.... or 10).

3. The number will be displayed and dialed automatically.

VOLUME BUTTON

A built-in amplifier feature allows you to increase the listening volume when speaking with your party. When needed, press the VOLUME button to achieve different levels. The volume will go back to default after you hang up the handset. Default volume is mid- level.

REDIAL/PAUSEBUTTON

1. If the number you dialed is busy, or you want to call the last number dialed again, press and release the hookswitch for a new dial tone.

2. Press REDIAL. The number will appear on the display window.

3. The last number called will automatically be redialed.

The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line.

1. Press the PAUSE button once and release at any point in the dialing sequence where a pause is desired.

2. The PAUSE button can be pressed more than once to create a longer pause.

HOLD BUTTON

1. To place a call on hold, press the HOLD button. The Line LED will then flash. Press the Line button being used to release Hold.

2. To Answer a Call on the other line while speaking on one line. Place the current

line on hold. Press the ringing Line button, Line 1 or Line 2. If you want the second call to join you in a three-way conference, press the CONF.

3. To Place both calls on hold press the Hold button and both lines will be on hold at the same time. The Line/Hold LEDs will light. To cancel hold for only one line press the desired line button (Line 1/2). The other line will remain on hold.