Cortelco Colleague instruction manual Flashbutton, Call Waiting Display, Mutebutton, Ringer Volume

Page 15

FLASHBUTTON

This telephone provides a break signal for a PABX service of Call Waiting from your local telephone company. The Flash time is programmable from 100ms to 1000ms, in 50ms increments. You can change the flash time in the setup procedure. The default Flash time is 600ms. If you have Call Waiting service, you can alternate the Call Waiting function per the following instructions.

1. While having a conversation, another party calls and you hear a tone.

2. Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered.

3. Press FLASH button again and release. The first caller can be spoken to again and the second call is placed on hold.

Note: If you also have subscribed to Call Waiting Caller ID service, please see Call Waiting Display below

CALL WAITING DISPLAY

In the past, if you had call-waiting service, a tone alerted you there was a new call coming while you were on an existing call. Now our Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before you answer it. The call waiting information is shown on the unit’s display. The CALL WAITING (CW) symbol will flash for 16 seconds along with the telephone number and name of the person who is on call waiting. Press the FLASH button to put the existing call on hold and answer the new call.

No matter whether you answer the call or not, the Call Waiting Caller ID will store the call information for future reference.

Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller ID service from your local telephone company. If you only have Caller ID service, the unit works for Caller ID only.

MUTEBUTTON

Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up and remain lighted until you resume your conversation. To resume your conversation, press MUTE. The MUTE indicator will go out and your call can continue.

RINGER VOLUME

 

Use the Ringer Volume controls located on the right side of the phone base to

change ringer volume for Line 1 and Line 2. The 3-position switches are used to set

ringer volume to Off, Low or Hi. Remember to set the Ringer switches to Hi or Low when

you want to receive calls.

12

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents OWNER’S Page Table of Contents Using the Caller ID Function Using the DirectoryImportantsafetyinstructions Page SET UP/INSTALLATION Using Your TelephoneWall Mount Instructions Features of Your Telephone Factorypresets Setting UP Your UnitPage Placing a Phone Call Receiving a Phone CallSpeakerphonebutton Duration CounterAutomatic Memory Volume Button REDIAL/PAUSEBUTTONHold Button Mutebutton Ringer VolumeFlashbutton Call Waiting DisplayUsing the Directory Dialingtelephonenumbersfrommemory To Store a NEW Number and Name Into the DirectoryFinding Items in the Directory Editing in the DirectoryUsingkeypadtoentername Using the Caller ID Function Message LightMessagewaiting Reviewing Calls Receiving CallsDeleting Calls Caller ListDial Options Button CallbackPage Message Error No Data SentPrivate Calls Unknown Caller Telephoneserviceproblems Maintenance Information Message Error Happens FrequentlyIncaseofpowerfailure Repair of Your Telephone FCC Wants YOU to Know Limitedwarranty
Top Page Image Contents