4.Press and hold a number to store the preset position. To store a
The system uses preset 0 as the default camera position.
To delete all presets:
1.If a call is connected, press Near to choose a
2.Press Preset on the remote control.
3.Press Delete to delete all presets.
You cannot delete just one preset. Instead, override an existing preset with the new
camera position.
Switching Between Full Screen Video and the Home Screen
Before the call connects, you see the near video in a small window on the Place a Call (home) screen. When the call connects, the system automatically shows the video in the whole screen. You can switch back to the Place a Call screen during a call, for example, if you need to adjust a user setting, and your system is configured to allow you to do so.
To see the video in the full screen:
oPress Near on the remote control.
To see the Place a Call screen:
oPress Home on the remote control.
Showing, Moving, and Turning Off the PIP
During a call on a
During a call on a
To show, move, or turn off the PIP during a call:
oPress PIP on the remote control to display the PIP on screen.
oWhile the PIP has a yellow border, press PIP repeatedly to move it to different corners of the screen.
oAfter a brief pause, the PIP border turns blue. Then, press PIP to turn the PIP off.
14