Telstrat VSX Series manual Controlling What You Hear, Adjusting Volume, Muting the Microphone

Page 16

Controlling What You Hear

Adjusting Volume

Use the remote control to raise or lower the volume of the sound you hear.

Changing the volume affects only the sound you hear at your site.

To adjust the volume:

Press Volume.

Muting the Microphone

You can mute the microphone if you do not want the far site to hear you. For example, you might mute the microphone if you want to speak to someone privately.

To mute or un-mute the microphone:

Press Mute on the remote control.

For VSX set-top and component systems that use a Polycom microphone, you

can also mute the call by pressing on the microphone.

Enjoying Stereo Audio in Video Calls

If your video conferencing room is configured to use stereo sound, the left and right microphone inputs are configured during system setup. It is important that you do not move the microphones as this may detract from the stereo audio experience.

Stereo audio is only used in video calls of 256 Kbps or higher.

Image 16

Contents Getting Started Guide Contents Video Conferencing Tips Assistance & SupportGetting Started Guide System BasicsVSX7400s Series Handset Calling and Answering Answering a Video CallPlacing a Video Call To answer the call manuallyCalling by Entering a Name or Number Calling from the Recent Calls ListTo place a call by entering a name or number To place a call from the Recent Calls screenCalling from the Contacts or Speed Dial List Ending a Video CallCalling from the Directory Types of Video Calls You Can Make You can call« By dialing«Placing Audio-only Calls and Adding Audio-Only Sites Placing an Audio-Only CallAdding an Audio-Only Call to a Video Call To place an audio-only call from your systemSelecting and Adjusting a Camera or Other Video Source Controlling What You SeeEnding an Audio-Only Call Adding a Video Call to an Audio-Only CallTo adjust a camera using the remote control To move the camera to a preset Setting and Using Camera PresetsTo store a preset Switching Between Full Screen Video and the Home Screen Showing, Moving, and Turning Off the PIPTo swap the views shown in the PIP and the main screen Swap PIP iconAdjusting Volume Controlling What You HearMuting the Microphone Enjoying Stereo Audio in Video CallsShowing Content and Video Sources Using a Document Camera or Microscope CameraBefore the call begins To start showing a document or an object in a callTo start showing a videotape or DVD in a call Using a VCR or DVD PlayerTo stop showing a videotape or DVD in a call To place a video call using the SoundStation VTX 1000 phone To add video or audio-only sitesEnding a Call To add video to an audio callVideo Conferencing Tips Ending a Call with Audio-Only ParticipantsTips for Great Meetings Tips for Great VideoTips for Great Audio Tips for Showing ContentVSX Set-Top and Component Systems