Vertical Communications II, DSU manual Pulse/tone Switching, Using Call Forwarding

Page 23

GCA70–246

Using The Other Telephone Features

•To respond when your Tracker Pager displays park orbit dialing code,

1.From any system station, press INTERCOM.

2.Dial displayed orbit code (# 91–99).

3.Retrieve call.

7.3Pulse/tone Switching

If the local telephone service is pulse (rotary), convert to tone while dialing as follows:

press # at point in dialing sequence where conversion to tone is re- quired.

NOTE: Pulse/Tone switching can be programmed into speed dial numbers by pressing # during number storage.

7.4Using Call Forwarding

•

•

•

To forward personal calls to another telephone,

1.Lift handset. Listen for intercom dial tone.

2.Dial ✳ 05,

3.Dial extension number of station to which calls are to be forwarded.

To cancel personal call forward,

1.Lift handset and listen for intercom dial tone.

2.Dial # 05.

To forward all calls to another telephone,

1.Lift handset and listen for intercom dial tone.

2.Dial ✳ 5.

3.Dial extension number of station to which calls are to be forwarded.

Single Line Station User's Guide 7 – 3

Image 23

Contents DSU and DSU II Series Digital Telephone Systems Telephone Models Contents Storing Speed Dial Numbers Using The Other Telephone FeaturesSingle Line Telephone IntroducingUnderstanding What The Lights Mean Impact 8101N Single Line Telephone Adusting Your Telephone’s Pedestal Model 8201N only ∙ To answer a call that is ringing within your group Answering CallsAnswering Calls ∙ To answer a call that is ringing at your telephone∙ To Remove Block ∙ To Receive a Sohva∙ To Reply to a Sohva 8201N only ∙ To Block SohvaMaking a Call To access outside line using line group featureMaking Calls Getting a Dial ToneTo queue for a busy line group To access intercom lineTo cancel queuing Waiting For a Line QueuingTo program personal speed dial numbers Using Speed Dial NumbersTo dial personal speed dial numbers To dial system speed dial numbersTo use Toll Restriction Override at a station Using Toll Restriction Override TRORedialing Last Number Used To redial last number usedTo return to call on Hold To use the Hold recall featureHolding Calls To use manual HoldTo retrieve parked call To park a callTo make an unscreened transfer Transferring Outside CallsTo make a screened transfer Press TRANSFER/CONFERENCEThis page remains blank intentionally Conferencing Calls ConferencingThis page remains blank intentionally Paging Using The OtherTelephone Features Using The Recall/flashTo disable the Tracker pager at your station To enable the Tracker pager at your stationTo forward personal calls to another telephone Pulse/tone SwitchingUsing Call Forwarding To cancel personal call forwardTo answer call-back ring Using Automatic Call-BackTo cancel all call forward To cancel automatic call backUsing Automatic Set Relocation Using Call Waiting∙ To set the ring volume Setting Your Personal Ringing TonesSetting Your Ring Volume Sending System-Supplied LCD Messages MessagingRetrieving Messages To activate station-to-station messaging Using Station-To-Station MessagingTo cancel station-to-station messaging ∙ To store an outside number as a speed dial number Programming Your TelephoneStoring Speed Dial Numbers This page remains blank intentionally Symptom Possible Cause Troubleshooting Your TelephoneThis page remains blank intentionally Glossary Glossary GCA70-246 Single Line Station Users Guide G-3 Glossary GCA70-246 Publication Index Index GCA70-246 GCA70-246 Index This page remains blank intentionally Quick Reference Guide Appendix aNight Answer Page Page Page Page Page Charlottesville, Virginia