Remote Access
Switching on remotely
Imagine that you have left your office or your house and have forgotten to switch on your answering system. Using the remote access facility, you can switch on the answering system from another telephone.
1.Call your number and let it ring until your call is answered by your answering system (ca. 10 times).
2.After the signal tone, enter your personal authorisation code. Two tones confirm that the right code has been entered.
3.Press the keys 9 and # and your answering system will be switched on.
4.Now hang up the call or make use of further remote access functions.
Remote access with insufficient memory capacity
You can control your answering system at any time using the remote access facility. If, however, there is no memory left for new messages, the answering system will no longer accept calls. In this case, please proceed as follows:
1 Call your number.
2.Let it ring 10 times and your answering system will respond with three tones.
3.Now enter your authorisation code.You will hear two tones in confirmation, you now have the possibility of freeing more memory
space by deleting messages. To do this, first listen to the messages and then delete individual messages or all messages. See also Item Remote access facilities.
15