Remote Access
Replay all recorded messages | Press 2 and # |
Replay newly recorded messages | Press 2 and 5 |
Room mornitoring | Press 0 and # |
While playing back, you have the following options:
Skip next message | Press 7 and # |
Repeat current message | Press 8 and # |
Repeat previous message | Press 6 and # |
Delete current message | Press 3 and # |
Stop current message | Press # and # |
After the last message, the system answers with several tones. Now, within the next 20 seconds, you have various possibilities. If you do not make any input within 20 seconds, the connection will be cut off automatically and all messages will remain saved.
Record memo | Press 8 and # |
Repeat all messages | Press 2 and # |
Delete all messages | Press 3 and # |
Switch off answering system | Press 9 and # |
After this input, the answering system is no longer ready for operation. Save all messages no input required
1.Call your own telephone number and allow the greeting message to play through to the end. Wait until your answering system is ready to record a message.
2.After the tone, enter your personal authorization code by pressing the appropriate numbers on the telephone. Two tones confirm that the right code has been entered.
3.To
Dictate your new greeting after the signal tone.
4.Complete the recording with the keys 7 and #. The new greeting will now be repeated.
5.Finish the call by hanging up.
14