Getting Started
Connecting your Oricom AM900
Example of Connecting the System
Connect to a phone wall socket.
Existing corded or cordless phone (not supplied)
Adaptor plug (supplied) |
Modular line cord not supplied.
Depending on the type of phone and phone wall socket you have you may need to purchase a different type of telephone line adaptor plug. These are available from electronics stores.
Warning. Use only the AC adaptor supplied with this product. Incorrect adaptor polarity or voltage can seriously damage the AM900 and or be dangerous.
AC adaptor part number #: S005CS0900030, Input:
Hz, Output: DC9V 300mA
1.Plug the AC adaptor into a power point.
2.Plug the small plug on the AC adaptor into the socket on the rear of the answering system.
3.After initialisation, the display will show 00 on the message counter.
Setting the day, time and Language
The answering system always saves the day of the week and the time of day with each recorded message so that you always know when callers left their messages however the time and day must be set correctly.
If you want to enter the day, time and language for the first time or if you want to change a day and time that has already been set, please proceed as follows:
1.Press and hold the SKIP button for 2 seconds. You will hear the day of the week.
2.Press the SKIP button repeatedly until you hear the correct day of the week.
6