Sprint Nextel SP-809 owner manual Installing and Charging the Battery Pack

Page 12

43-5809.fm Page 12 Wednesday, August 18, 1999 1:43 PM

Installation

INSTALLING AND CHARGING THE BATTERY PACK

The SP-809 is packaged with a rechargeable nickel-cadmium bat- tery pack. Before using your phone, you must install the battery pack and then charge it for 12–15 hours.

Press down and slide off the compartment cover. Place the battery pack into the com- partment aligning the battery pack with the polarity marks (+ and –) inside. Replace the cover.

To charge the battery pack, simply place the handset on the base. The CHARGING in- dicator on the base lights.

Note: You can place the handset on the base faceup or facedown.

Recharge the battery pack when the LOW BATT indica- tor on the handset flashes.

Notes:

LOW BATT Indicator

²When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear a two- beep signal when you press TALK. If this happens, return the handset to the base for about 30 seconds. This resets the security access protection code.

12

Image 12

Contents Digital Phone Answering System Fm Page 2 Wednesday, August 18, 1999 143 PM Features Fm Page 4 Wednesday, August 18, 1999 143 PM Read this Before Installation FCC StatementContents Using the Toll-Saver Using Remote Commands Installation Selecting a LocationPlacing the Base on a Desk TOP Mounting the Base on a Wall Upper Slots Adapter Cord Lower Slots Installing and Charging the Battery Pack Charging Charging ContactsContacts Charging a Spare Battery Pack Setting the Dialing ModePreparation Setting the DAY and Time About the Mailboxes Announcement OptionsTAD announces Selected Announcement is… Checking the Announcement Reviewing the TAD Settings Setting the Number of RingsSetting Message Alert Changing the Remote Access CodePriority Calling Code Setting the HANDSET’S Ringer Setting the BASE’S RingerUsing the Belt Clip Fm Page 22 Wednesday, August 18, 1999 143 PM Telephone Operation Making and Receiving a CallUsing the Priority Calling Code Setting the HANDSET’S VolumeSetting the SPEAKERPHONE’S Volume Using RedialChanging the Channel Using Flash Using HoldUsing Mute Using Tone Services on a Pulse LineUsing PAGE/INTERCOM Intercom Locator Memory Dialing Storing a Number in MemoryEntering a Pause Dialing a Memory Number Setting the TAD to Answer Calls TAD OperationIncoming Message Recording Screening Calls Playing Messages Deleting Messages Recording a MemoRecording a Conversation ANS SYS Using the TOLL-SAVER Remote OperationUsing Remote Commands From a remote touch-tone phoneRemote Commands While playing messages Troubleshooting ² Unplug the AC adapter from the outlet Fm Page 44 Wednesday, August 18, 1999 143 PM Care and Maintenance Replacing the Handset Battery Pack FCC Wants YOU to Know Lightning Fm Page 49 Wednesday, August 18, 1999 143 PM Fm Page 50 Wednesday, August 18, 1999 143 PM Fm Page 51 Wednesday, August 18, 1999 143 PM RadioShack Division of Tandy Corporation Fort Worth, Texas