Sprint Nextel SP-809 Preparation, Charging a Spare Battery Pack, Setting the Dialing Mode

Page 14

43-5809.fm Page 14 Wednesday, August 18, 1999 1:43 PM

Preparation

CHARGING A SPARE BATTERY PACK

You can also charge and store a spare battery pack in the base. The spare battery pack fully charges in 15 hours.

1Press the tab on the spare battery pack compart-

ment and lift off the cover.	Tab

2Place the battery pack in the compartment as indicated by the polarity symbols (+ and –) marked inside. The SPARE BATT/CHARGING indicator on the base lights.

3Replace the cover.

SPARE BATT/ CHARGING Indicator

nPreparation

SETTING THE DIALING MODE

Set the dialing mode for the type of service you have. If you are not sure which type you have, once the handset’s battery pack is fully charged, do this test.

1 Lift the handset, then

press PHONE and listen forPHONE the dial tone.

2Press any number other than 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either.

14

Image 14

Contents Digital Phone Answering System Fm Page 2 Wednesday, August 18, 1999 143 PM Features Fm Page 4 Wednesday, August 18, 1999 143 PM Read this Before Installation FCC StatementContents Using the Toll-Saver Using Remote Commands Installation Selecting a LocationPlacing the Base on a Desk TOP Mounting the Base on a Wall Upper Slots Adapter Cord Lower Slots Installing and Charging the Battery Pack Charging Charging ContactsContacts Preparation Charging a Spare Battery PackSetting the Dialing Mode Setting the DAY and Time About the Mailboxes Announcement OptionsTAD announces Selected Announcement is… Checking the Announcement Reviewing the TAD Settings Setting the Number of RingsPriority Calling Code Setting Message AlertChanging the Remote Access Code Using the Belt Clip Setting the HANDSET’S RingerSetting the BASE’S Ringer Fm Page 22 Wednesday, August 18, 1999 143 PM Telephone Operation Making and Receiving a CallUsing the Priority Calling Code Setting the HANDSET’S VolumeChanging the Channel Setting the SPEAKERPHONE’S VolumeUsing Redial Using Flash Using HoldUsing PAGE/INTERCOM Using MuteUsing Tone Services on a Pulse Line Intercom Locator Memory Dialing Storing a Number in MemoryEntering a Pause Dialing a Memory Number Incoming Message Recording Setting the TAD to Answer CallsTAD Operation Screening Calls Playing Messages Deleting Messages Recording a MemoRecording a Conversation ANS SYS Using the TOLL-SAVER Remote OperationUsing Remote Commands From a remote touch-tone phoneRemote Commands While playing messages Troubleshooting ² Unplug the AC adapter from the outlet Fm Page 44 Wednesday, August 18, 1999 143 PM Care and Maintenance Replacing the Handset Battery Pack FCC Wants YOU to Know Lightning Fm Page 49 Wednesday, August 18, 1999 143 PM Fm Page 50 Wednesday, August 18, 1999 143 PM Fm Page 51 Wednesday, August 18, 1999 143 PM RadioShack Division of Tandy Corporation Fort Worth, Texas