Preparation
Changing the Priority Calling Code
To change the priority calling code, press CHANGE then repeatedly press SET UP until you hear “The priority calling code is …” and fol- low the voice prompt instructions. Press STOP when you are done.
SETTING THE HANDSET’S RINGER
You can turn off the handset’s ringer by setting RINGER on the side of the handset to OFF. Turn it back on by set- ting RINGER to ON.
SETTING THE BASE’S RINGER
To turn the base’s ringer off or on, press CHANGE then repeatedly press SET UP until you hear “The base ringer is …” and follow the voice prompt instruction.
Note: Even with the base ringer off, you can make or receive calls using this phone, and telephones on the same line still ring when there is an incoming call. The handset rings and its PHONE indica- tor flashes until you answer the call.
USING THE BELT CLIP
You can use the
21