5.7 To mute the microphone
During a call press and hold down the MUTE button to mute the microphone on the handset and base. Release the button to resume speaking to the caller.
5.8 Pause
If needed for phone banking or behind a PBX system. You can insert a 3.6 seconds pause while dialing or storing a number into memory. Press REDIAL button at the desired point in number to insert a pause.
5.9 Storing numbers in the M1 & M2 one touch memories
1.Press and release the MENU button until the STORE NUMBER is shown.
2.Press the CALL BACK button. The cursor will flash in the first position.
3.Enter the required telephone number with a maximum of 22 digits using the number pad and confirm with CALL BACK button.
4.Press M1 or M2.
5.Confirm with CALL BACK button. The number has now been saved and display show SAVED!.
6.Repeat step 2 to 5 to store other numbers for other memory buttons or press CID button to exit.
To dial the numbers in the emergency MEMORY Buttons, simply pick up the handset or press SPEAKER button and press M1 or M2.
Note: the numbers stored in M1 and M2 memory buttons are for manual dialing only and are not dialled in the emergency call function.
6. The Phone Book
6.1 Storing numbers in the phone book
You can enter up to 30 names and numbers into the Phone book and choose which of those numbers will be dailled when the Emergency call function is activated and in which order they will be dialled.
1.Press and release the MENU button until STORE NUMBER is shown.
2.Press the CALL BACK button. The cursor will flash in the first position.
3.Enter the required telephone number including the area code (max of 22 characters) press CALL BACK button to confirm (both the erase feature and pause feature can be used when storing the telephone number).
4.Enter the required name (max 16 characters).The next section will explain how to enter names.
5.Confirm with CALL BACK button.The display now shows EMERGENCY OFF.
11