Oricom TP150 manual Voice Prompts, Receiver Volume Control, Hearing Aid Compatibility

Page 9

4.4 Voice Prompts

Voice prompts are provided to make it easy to use the TP150.The volume of the voice prompt can be adjusted with the VOLUME slide switch on the side of the phone.

If you prefer you may turn off the voice prompt function. NOTE: You will still hear all the phone book names you recorded.

1.Press and release the MENU button until VOICE is shown.

2.Press the CALL BACK button.

3.Using the or to select between VOICE YES or NO and confirm with CALL BACK button.

4.Press CID button to exit the set-up mode.

4.5 Receiver Volume Control

The receiver volume control enables you to adjust the receiver volume on the handset. Rotate the button on the base to select a comfortable listening level (1-9), the red LED will turn on.

WARNING

Setting the receiver volume to maximum may, under some situations cause ear damage.We suggest returning the volume control to the “0” (OFF) position after each call.

4.6 Hearing Aid Compatibility

This unit is compatible with most inductively coupled hearing aids on the market. However due to the wide range of hearing aids available we cannot guarantee that the TP150 will function error free with every model.

4.7 Receiver Tone Volume Control

You can use the TONE slide switch to adjust high frequency sounds. Words are clearer and easier to understand. Note: The tone adjustment function will not work if the receiver volume is set to the minimum level.

4.8 Selecting the ringer melody

1.Press and release the MENU button until RINGER MELODY is shown.

2.Press the CALL BACK button, the display shows RINGER MELODY 1.

3.Select the desired RINGER MELODY 1, 2 or 3 using or and confirm with CALL BACK button.

4.Press CID to exit the set-up mode.

4.9 Ringer Volume Control

The ringer sound level can be adjusted by sliding the RINGER switch. Select high (HI), mid (MID) or low (LO) level.

The bright Red light (LED) on the base will flash with all incoming calls.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Care Phone with Emergency Call Function TP150 General Information Page Caller ID REN RN for New ZealandN13134 Location of controlsInstalling batteries supplied in the phone InstallationConnecting the mains power supply Connecting the telephoneWall Mounting Setting Up Setting the contrastSetting the Time and Date Receiver Tone Volume Control Receiver Volume ControlRinger Volume Control Voice PromptsMaking a call Telephone OperationReceiving a Call Pre Dialing a CallNetwork Message Waiting Indicator Speaker Volume ControlLast number Redial Call waiting Recall buttonTo mute the microphone Phone BookPause Storing numbers in the M1 & M2 one touch memoriesPage How to enter names To review the Phone Book MemoryOverview To dial a number from the Phone Book To Delete the Phone Book Memory To Edit Phone Book MemoriesEmergency Message Emergency Call featureTo record your emergency message To check your emergency messageTo activate the Emergency Call function Receiving a Call Can be stored up to 64 calls Caller IDDeleting Numbers from the Caller ID Memory View the Caller ID MemoryCall Back Redial from the Caller ID Memory Copy from the Caller ID to the Phone BookPeriodic testing Testing the remote pendant batteryImportant Information Consumer Support and Troubleshooting Battery Backup on the phone baseAustralia New ZealandCleaning and care Warranty InformationExclusion and limitation of liability 2LMB95YY
Top Page Image Contents