Oricom TP150 manual To Edit Phone Book Memories, To Delete the Phone Book Memory

Page 16

6.5 To Edit Phone Book Memories

1.Press and release CID button until phone book symbol is shown.

2.Select the required location by pressing or .

3.Press and hold MENU button for two seconds. The display will show EDIT?.

4.Press CALL BACK button, the first digit of the selected phone number will flash.

5.You can move the cursor to the required position by pressing or . To delete the digit, press DELETE button, or press any numeric key to replace the digit, confirm with CALL BACK button. Then the display shows the flashing first letter of the name.

6.Move the cursor to the required position by pressing or . To delete the letter, press DELETE button, or press any numeric key to replace the name, and confirm with CALL BACK button, EMERGENCY ON or OFF is shown.

7.If the display shows EMERGENCY OFF, and you want to change it as an emergency’s call dial out, select EMERGENCY ON by pressing or , and confirm with CALL BACK button, now LOCATION is shown. Select the required location by pressing or and confirm with CALL BACK button, if the location is in use, now display shows OVERWRITE?, confirm with CALL BACK, SAVED! is shown.

If you select EMERGENCY OFF and confirm with CALL BACK, SAVED! is shown.

Warning: Selecting the correct memory sequence is very important as this feature determines the sequence in which the numbers will be dialled in the emergency feature. Location 1 will be dialled first, then 2, then 3 etc.

Warning: If you choose to overwrite a location, the previously stored number will be erased.

8.You can repeat step 2 to 7 to edit more numbers or press CID to exit.

6.6 To Delete the Phone Book Memory

1.Press and release CID button, symbol is shown.

2.Select the required location from the phone book by pressing or .

3.To delete single memory, press DELETE button once. The display will show the DELETE?. Press DELETE button for 2 seconds.The telephone number and name will be deleted and the display will now show another number from the phone book.

To delete all entire memory, press and hold DELETE button until the display shows DELETE ALL?. Press DELETE button for 2 seconds until EMPTY appears on the display.

15

Image 16
Contents Care Phone with Emergency Call Function TP150 General Information Page REN RN for New Zealand Caller IDLocation of controls N13134Installation Installing batteries supplied in the phoneConnecting the mains power supply Connecting the telephoneWall Mounting Setting the contrast Setting UpSetting the Time and Date Receiver Volume Control Receiver Tone Volume ControlRinger Volume Control Voice PromptsTelephone Operation Making a callReceiving a Call Pre Dialing a CallSpeaker Volume Control Network Message Waiting IndicatorLast number Redial Call waiting Recall buttonPhone Book To mute the microphonePause Storing numbers in the M1 & M2 one touch memoriesPage To review the Phone Book Memory How to enter namesOverview To dial a number from the Phone Book To Edit Phone Book Memories To Delete the Phone Book MemoryEmergency Call feature Emergency MessageTo record your emergency message To check your emergency messageTo activate the Emergency Call function Caller ID Receiving a Call Can be stored up to 64 callsView the Caller ID Memory Deleting Numbers from the Caller ID MemoryCall Back Redial from the Caller ID Memory Copy from the Caller ID to the Phone BookTesting the remote pendant battery Periodic testingImportant Information Battery Backup on the phone base Consumer Support and TroubleshootingAustralia New ZealandWarranty Information Cleaning and careExclusion and limitation of liability 2LMB95YY