Oricom ECO710 warranty Your Telephone Operations

Your Telephone Operations 11

Your Telephone Operations

Switching on/off

Press and hold the END button for more than 2 seconds to switch on/off the handset in standby mode.

You can switch the handset off and save battery charge.

Note:

When the handset is OFF, it cannot be used for making calls including emergency calls. There will be no ringing during an incoming call. To answer a call, you will need to switch it back on. It may take some time for the handset to re-establish a radio link with the base unit.

To lock/unlock the keypad

Press and hold the  key for 1 second to lock/unlock the keypad in standby mode.

Note:

Incoming calls can still be answered even if the keypad was locked.

Set time and date

Note:

If you subscribe to the Caller Display service, the time and date will be set automatically when you receive a call, but you may still need to set the correct year.

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n k e y to sel e ct CLOCK&ALARM and then press OK key to select.

3.Press OK key to select DATE/TIME. The last stored date is displayed. Enter the current date (YY-MM-DD), press OK, then enter the time (HH-MM).

4.Press the Navigation key to select AM or PM (if the time is in 12 HOURS format) and then press OK key to confirm. A confirmation beep is played.

Change your handset’s name

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n k e y to sel e ct PERSONAL SET and then press OK key to select.

3.Press the Navigation key to select HANDSET NAME and then press OK key to select. The current handset name is displayed.