Change recall time, Set first ring, Reset unit

28 Advanced use of your telephone

For numbers starting with *, # or P, the prefix number will not be added to the

Pre-dial number after TALK key is pressed.

Change recall time

You may need the R button to send a Recall signal if you are connected to a PBX. You should normally leave the Recall Time at its default setting of Short (100ms), as this is the standard recall required in the telephone network, but it can be changed to Medium (270ms) or Long (600ms) if your telephone is connected to a PBX that requires a different recall time.

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n key to s ele ct ADVANCED SET and then press OK key to select.

3.Press the Navigation key to select RECALL

TIME and then press OK key to select.

4.Press the Navigation key to select SHORT, MEDIUM or LONG and then press OK key to confirm. A confirmation beep is played.

Set first ring

When this function is set to Off, the first ring from an incoming call will not sound. This is useful on exchanges where calling line identity is sent after the first ring.

1.Press MENU key to enter menu selection.

2.Press the Navigation key to select ADVANCED

SET and then press OK key to select.

3.Press the Navigation key to select FIRST RING and then press OK key to select.

4.Press the Navigation key to select ON or OFF and then press OK key to confirm. A confirmation beep is played.

Reset unit

You can reset your phone to its default settings with this feature.

Note:

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset. Also, if you have an answering machine model, any recorded messages will remain unchanged, but all other settings will be defaulted.

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n k e y to s elec t ADVANCED SET and then press OK key to select.

3.Press the Navigation key to select RESET and then press OK key to select.

4. P r e s s O K k e y a g a i n t o c o n f i r m . A confirmation beep is played and the unit is reset to its default settings.