Oricom eco5100 Series Answering Machine Operation, Answering machine On / Off, Day/Time setting

Page 29

ANSWERING MACHINE OPERATION

Answering Machine Operation

Answering machine On / Off

During standby mode,
1. Press and hold	key to switch the answering machine off.

“Answering off” will be heard followed by two short beeps.

Note: During Off mode, the answering machine is set to AnnouncementTwo mode automatically. It will answer the call after 12 rings, and then switch to remote control mode. This feature can not be turned off.

During Off mode,

1. Press and hold key to switch the answering machine on. “Answering on,Announcement One” will be heard followed by a short beep.

Day/Time setting

Once you have set the day and time your answering machine will automatically an- nounce the day and time that each message has been received.

Default day and time – Sunday, 12:30

1. Press and hold key for 2 seconds. The voice prompt “Please set day” will be heard.

2. Press or MEMO key to select day. Voice prompt at each selection will be heard.

3. Press key to conﬁrm and go to next setting. The voice prompt “Please set hours” will be heard.

4. Press or MEMO key to select hours. Voice prompt at each selection will be heard.

5. Press key to conﬁrm and go to next setting. The voice prompt “Please set minutes” will be heard.

26

Image 29

Contents User Guide Contents Cordless Handset Operation …………………………………………………………… Page Getting Started Installation and ChargerImportantDOYOU have BROADBAND/ADSL? TipGetting Started Purchasing additional handsets Pack contentsYour cordless handset Understanding the cordless handset display Your eco5100 base unit GS Answering Machine Rings Code Answering Machine PIN BottomDuring standby Basic OperationAnswering an incoming call Cordless handsets LCD displayMaking an external call Mute featurePaging the handset/s Normal diallingHandset range Recall featureCall waiting Australia Only Take two different calls at the same timeRecall function when connected to a Pabx Pause feature when using on a PabxHandset volume control Handsfree modeVolume adjustment with handset Store a CID number Caller ID OperationReview Caller ID records DeleteallviewedCIDrecords Delete one or all CID recordsRedial the last number LNR Function Last Number RedialDelete last number dialled Store the last number dialledReview / Edit / Dial stored Phonebook records PhonebookAdd new records Delete one record Cordless Handset Operation Handset ringer adjustmentMulti-handset Operation Call transfer between cordless handsets Cordless handset keypad lockRemove handsets RegistrationRegister new handsets on the eco5100 base Handset name Language settingBase Melody BaseVolumeReset Answering machine On / Off Day/Time settingAnswering Machine Operation Answering machine PIN number Setting Answering machine Ring delay SettingOGM2 AnnouncementTwo mode OGM1 Announcement One modeOGM setting OGM Outgoing MessagesOGM play to line Play OGMPlay ICM ICM Incoming MessagesRecord ICM Delete messages MemoRecord memo Play memoDelete all messages Remember to delete messagesMemory full Switch your answering machine on remotely Remote controlAdvanced Answering System Phone in to check your messagesRemote operation keys Call screeningCordless handset detection Customer Support Appendix TroubleshootingAlternatively please contact Customer Service on 1300 889 Phone Oricom eco5100 Speciﬁcations Product SpeciﬁcationsExclusion and limitation of liability Warranty Information AustraliaWarranty Caller ID REN RN for New ZealandCustomer Support