Oricom eco5100 Series manual Getting Started, Installation and Charger, Tip

Page 5

GETTING STARTED

Getting Started

Installation and Charger

1. Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply.

2. Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.

Note: In Australia some phone wall sockets are the old non modular style. If you have this type of wall socket you will need to purchase a “modular converter plug” (not supplied). These can be obtained from electronic stores.

Important:DOYOU HAVE BROADBAND/ADSL?

If you do, you must connect an in line filter (not supplied) between the telephone socket and your eco5100 base to ensure that your broadband and eco5100 will work properly. If you do not install the filter you will experience interference on the eco5100 and your Broadband may suffer dropouts. Please refer to the user guide of the in line filter for installation.

3. Insert 2 rechargeable Ni-MH AAA batteries (included), observing the correct polarity, into the battery compartment

on the handset. Slide the battery door ﬁrmly into place.

4. Place the handset on the charging cradle and charge the bat- teries for a full 15 hours before using it for the ﬁrst time.

Tip!

It is good practice to put the cordless handset on the charging cradle when it is not in use to ensure that the handset is always fully charged.

2

Image 5

Contents User Guide Contents Cordless Handset Operation …………………………………………………………… Page Getting Started Installation and ChargerImportantDOYOU have BROADBAND/ADSL? TipGetting Started Purchasing additional handsets Pack contentsYour cordless handset Understanding the cordless handset display Your eco5100 base unit GS Answering Machine Rings Code Answering Machine PIN BottomDuring standby Basic OperationAnswering an incoming call Cordless handsets LCD displayMaking an external call Mute featurePaging the handset/s Normal diallingHandset range Recall featureCall waiting Australia Only Take two different calls at the same timeRecall function when connected to a Pabx Pause feature when using on a PabxHandset volume control Handsfree modeVolume adjustment with handset Store a CID number Caller ID OperationReview Caller ID records DeleteallviewedCIDrecords Delete one or all CID recordsRedial the last number LNR Function Last Number RedialDelete last number dialled Store the last number dialledReview / Edit / Dial stored Phonebook records PhonebookAdd new records Delete one record Cordless Handset Operation Handset ringer adjustmentMulti-handset Operation Call transfer between cordless handsets Cordless handset keypad lockRemove handsets RegistrationRegister new handsets on the eco5100 base Handset name Language settingBase Melody BaseVolumeReset Answering machine On / Off Day/Time settingAnswering Machine Operation Answering machine PIN number Setting Answering machine Ring delay SettingOGM2 AnnouncementTwo mode OGM1 Announcement One modeOGM setting OGM Outgoing MessagesOGM play to line Play OGMPlay ICM ICM Incoming MessagesRecord ICM Delete messages MemoRecord memo Play memoDelete all messages Remember to delete messagesMemory full Switch your answering machine on remotely Remote controlAdvanced Answering System Phone in to check your messagesRemote operation keys Call screeningCordless handset detection Customer Support Appendix TroubleshootingAlternatively please contact Customer Service on 1300 889 Phone Oricom eco5100 Speciﬁcations Product SpeciﬁcationsExclusion and limitation of liability Warranty Information AustraliaWarranty Caller ID REN RN for New ZealandCustomer Support