Oricom BB100 manual Reset to factory default settings, Quick default settings

Page 22

Reset to factory default settings

This feature will restore the factory default settings of your phone. All programming earlier done like setting the ringing volume, ringing melody, external call melody, clear the phonebook, clear the LNR, etc. will be erased.

1.

Press OK button. ‘

’ is displayed.

2.

Use DOWN button to scroll to

.

3.

Press OK button,

is displayed.

4.Use DOWN button to scroll to the option.

5.

Press OK button. The LCD shows .

6. Enter the base PIN number from the numeric keypad.

7. Press OK button.

Then the handset and base will apply default settings and make a software reset.

Quick default settings

If you loose your PIN code, the following procedure restores default settings on handset and base. Note: the base should be connected to power during this process.

1.Remove the handset batteries. Wait for 5 seconds, Insert batteries and closely watch the display on the handset.

2.Press star key (*) on the handset keypad immediately whilst the handset is initiating (i.e. when the all the icons are showing on handset LCD.)

3.The LCD will show .

4.Press the OK button. Wait for about 3 seconds.

5.Then Base will reset first followed by the handset. After the handset and base reset, the unit will go into the standby mode.

- 22 -

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Using Your Phone ContentsAdvanced Features Safety Information Handset and Base unit LCD Layout Icon Name DescriptionSetting the handset date and time Handset battery charge levelSelecting a site for the Base unit To make and end calls Standby modeUsing Your Phone Preparatory dialling pre-dialUsing Pause function Using MuteUsing Recall Adjust the handset earpiece volume during a callOut of range warning Using the Phone BookFunction Storing an entry in the phone bookSimple way to access phonebook Dialing a phone book entryEditing an entry in the phone book Deleting an entry in the phone bookCaller ID CID To store a CID entry in the phonebook Deleting a CID recordMessage waiting service Personalising Your SettingsSetting the handset ringer volume Selecting Base Ringer melodiesSetting Handset Earpiece Volume Setting Base Ringer VolumeAlert tones Out of range Renaming the Handset Language selection Handset keypad lock/unlockAdvanced Features Recall time selection Pause time selectionReset to factory default settings Quick default settingsTroubleshooting Guide Problem Possible Cause Action TakenREN RN for New Zealand Caller IDWarranty Information
Top Page Image Contents