Handset and Base unit
1.Receiver
2.LCD display
3.PHONEBOOK button - Use to access phonebook.
4.TALK button
-Press to make/receive/end external calls.
-To escape from programming
5.Up button
-To enter the redial list in standby mode
-Long press to enter a pause in the dialling sequence
-To adjust earpiece volume during a call
-To scroll up through the menu options/settings
-To scroll up the phonebook/call list
6.Down button
-To enter the CID call list in standby mode
-To adjust earpiece volume during a call
-To scroll down through the menu options/settings
-To scroll down the phonebook/call list
7.OK/Menu button
-To confirm settings
-To enter the menu
8.MUTE button - To use the mute function during a call.
9.Cancel/ INT/Power button
-To cancel display digits or characters.
-Long press to exit menu setting
-To make an internal call to another handset (Only available if you have more than one handset)
-Long press to power off the handset
-Press to power on the handset
10.Recall button - For use with network services
11.Numerical dial buttons - Use to dial numbers and characters
12.Microphone
13.Battery charging indicator
-Illuminates when the handset is on the base/charging.
14.In use indicator
-Illuminates when the handset is in use
-Flashes when you receive incoming calls
-Flashes when entering registration mode
-Flashes when there is new CID call received
15.Page button
-Press to locate a misplaced handset
-Long press to enter registration mode
-5 -