Re-dialing, Using Mute, Using Recall

1)	Press ‘TALK’ button to answer the call.
2)	To end the call, either press TALK button or place the handset
	back on the base.

Re-dialing

The last 10 dialled external numbers are stored for redialling (in the re-dial list). The number can consist of up to 25 digits. The user can select any number on the redial list to redial in pre-dialling mode. The last calls appear with their name if they are stored in the phonebook.

To redial any of the last 10 numbers called

1) In standby mode, press UP button. The last number dialled is displayed.

2)	or	Scroll through the calls with UP and DOWN buttons.
3)		Press OK button to toggle between name and number if necessary.
4)		If you don’t want to redial, use CANCEL to exit.
5)		Press TALK button when the number you desired appears.
6)		To end the call, press TALK again or replace the handset on the
		base unit.

Using MUTE

During a call you can mute your voice so that you can speak privately to a third party without the caller being able to hear you. You will still be able to hear your caller.

1)	During a call, press the MUTE button (the mute icon will appear in
	the LCD)
2)	Press the MUTE button again to talk to your caller again.

Using Recall

This button is used for network services – e.g. to access call waiting, conference calling and other services provided by your local phone service provider. Subscriptions may apply.

Using Pause function

Press and hold the UP button for about 3 sec, you can insert a pause in the memory dialling sequence.

Adjust the handset earpiece volume during a call

or during a call, use the ‘UP’ or ‘DOWN’ button, you can adjust the receiver volume to a high or

low level. The display will show ‘ n’ (n=volume level from 1 to 5).

- 9 -