Oricom BB100 Standby mode, Using Your Phone, To make and end calls, Preparatory dialling pre-dial

Page 8

Standby mode

When the handset is not in use is in the standby mode. The LCD will display:

1 BB100 10.37

Where:

1:Handset assigned number

BB100: Handset name

10:37: Time of the day ( 10 AM, 37 minutes) (ex : 23:37 : 11 PM, 37 minutes)

Note: If power is disconnected from your phone, the clock will be inaccurate. When the power is restored, it will be automatically reset the time to 12:00 and the date to 01/01. You need to set the correct time and date when the power is turned on.

If you subscribe to your network operators Caller ID services, your phone clock will automatically set the time and date when you receive CID from the network.

USING YOUR PHONE

To make and end calls:

1)

Press “Talk” button and wait for dial tone. The In Use indicator

 

and icon will appear in the display.

2)

Dial your desired number on handset.

3)

Speak into the microphone when the party answers.

4)

To end the call, either press ‘Talk” or place the handset back on

 

the base. The In Use indicator

and icon will disappear.

Preparatory dialling (pre-dial)

Pre-dialling allows you to enter and modify a number before dialling.

1)In standby mode (i.e. when the phone is not in use), enter the telephone number from the numeric keypad. (up to 25 digits allowed. If the number exceeds 12 digits, the last 12 digits are displayed) you wish to dial; it will appear in the display.

2)

If you have entered a digit incorrectly, you can delete it by pressing

3)

the CANCEL button.

If you wish to delete the whole telephone number, press and hold

 

 

the CANCEL button for 3 seconds. The handset will return to

 

standby mode.

4)

Press TALK button. The displayed number will be dialled.

5)

To end the call, either press the TALK button or place the handset

 

back on the base.

Receiving external calls

•When you receive an incoming call both your handset and base will ring, provided that the ringers are

set to on. The icon will flash in the handset display and the In Use LED on the base will flash as well.

•If you have subscribed to caller ID service, the New CID symbol (see LCD layout) blinks in the display. The caller’s number (if available) is also displayed. The date and time of the call is displayed when OK is pressed.

-8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Using Your Phone ContentsAdvanced Features Safety Information Handset and Base unit LCD Layout Icon Name DescriptionSelecting a site for the Base unit Handset battery charge levelSetting the handset date and time Standby mode Using Your PhoneTo make and end calls Preparatory dialling pre-dialUsing Mute Using RecallUsing Pause function Adjust the handset earpiece volume during a callUsing the Phone Book FunctionOut of range warning Storing an entry in the phone bookSimple way to access phonebook Dialing a phone book entryEditing an entry in the phone book Deleting an entry in the phone bookCaller ID CID To store a CID entry in the phonebook Deleting a CID recordMessage waiting service Personalising Your SettingsSetting the handset ringer volume Selecting Base Ringer melodiesAlert tones Setting Base Ringer VolumeSetting Handset Earpiece Volume Out of range Renaming the HandsetLanguage selection Handset keypad lock/unlockAdvanced Features Recall time selection Pause time selectionReset to factory default settings Quick default settingsTroubleshooting Guide Problem Possible Cause Action TakenREN RN for New Zealand Caller IDWarranty Information
Top Page Image Contents